The New Holland T6010 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.6 gpm (DELTA) | 62.8 lpm, hydraulic pressure is 2756 psi | 190.0 bar, and hydraulic type is fixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS).
Hydraulic Flow16.6 gpm (DELTA) | 62.8 lpm
Pressure2756 psi | 190.0 bar
Hydraulic Typefixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS)
Valves / Remotes3 (DELTA)
New Holland T6010 Hydraulic Capacity & Flow Specs
Hydraulic type
fixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS)
Hydraulic pressure
2756 psi | 190.0 bar
Pump flow
16.6 gpm (DELTA) | 62.8 lpm
Hydraulic valves
3 (DELTA)
New Holland T6010 Useful Hydraulic Calculations
Estimated hydraulic horsepower
about 26.7 hydraulic hp from listed pressure and pump flow
Pump flow per listed valve
5.5 gpm per valve
New Holland T6010 Hydraulic Comparison Charts
Pump flow comparison
This model
16.6 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,756 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Valve / remote count comparison
This model
3
Average
2
Low
1
High
4
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T6010 Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
New Holland T6010 Hydraulic Capacity FAQ
Why is the New Holland T6010 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T6010, but pump flow is 16.6 gpm (DELTA) | 62.8 lpm, pressure is 2756 psi | 190.0 bar, and system type is fixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS). For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T6010 hydraulics feel fast or slow?
The useful speed clue is 16.6 gpm (DELTA) | 62.8 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland T6010 hydraulic pressure tell you?
The pressure spec is 2756 psi | 190.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland T6010?
On the New Holland T6010, 16.6 gpm (DELTA) | 62.8 lpm pump flow points to quicker loader and cylinder movement and 2,756 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T6010?
For implement matching, the useful checks are 16.6 gpm flow, 2,756 psi pressure, and 3 (DELTA) remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the New Holland T6010 hydraulic remotes enough?
The New Holland T6010 lists 3 (DELTA) for valves/remotes. That is generous for this category and better for implements with more than one hydraulic function.
Will the New Holland T6010 hydraulics handle long hydraulic jobs?
The useful heat clues are 16.6 gpm flow, 2,756 psi pressure, and about 26.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland T6010 make on paper?
Using 2,756 psi and 16.6 gpm, the rough pressure-flow estimate is about 26.7 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What hydraulic system does the New Holland T6010 use?
The hydraulic system is listed as fixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS) with 16.6 gpm (DELTA) | 62.8 lpm pump flow and 2756 psi | 190.0 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T6010 hydraulics?
For service planning, the system is listed as fixed displacement | fixed displacement close center load sensing Optional on PLUS (CCLS), pressure is listed at 2,756 psi, and flow is listed at 16.6 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
