The New Holland T5.140 Dynamic/Auto Command tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 21.1 gpm | 79.9 lpm, hydraulic pressure is 2900 psi | 200.0 bar, and hydraulic type is closed center load-sensing.
Hydraulic Flow21.1 gpm | 79.9 lpm
Pressure2900 psi | 200.0 bar
Hydraulic Typeclosed center load-sensing
Valves / Remotes4 Optional
Lift Capacity10228 lbs | 4639 kg
New Holland T5.140 Dynamic/Auto Command Hydraulic Capacity & Flow Specs
Hydraulic type
closed center load-sensing
Hydraulic pressure
2900 psi | 200.0 bar
Pump flow
21.1 gpm | 79.9 lpm
Steering flow
9.6 gpm | 36.3 lpm
Rear remotes
4 Optional
New Holland T5.140 Dynamic/Auto Command Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
electronic draft control
Rear lift at ends
12125 lbs | 5499 kg
Rear lift at 24 inches
10228 lbs | 4639 kg
New Holland T5.140 Dynamic/Auto Command Useful Hydraulic Calculations
Steering flow vs pump flow
45.5% of listed pump flow
Rear lift per pump gpm
484.7 lb per gpm
Estimated hydraulic horsepower
about 35.7 hydraulic hp from listed pressure and pump flow
New Holland T5.140 Dynamic/Auto Command Hydraulic Comparison Charts
Pump flow comparison
This model
21.1 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,900 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
10,228 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T5.140 Dynamic/Auto Command Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Differential lock
electro-hydraulic front and rear
New Holland T5.140 Dynamic/Auto Command Hydraulic Capacity FAQ
Why is the New Holland T5.140 Dynamic/Auto Command hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T5.140 Dynamic/Auto Command, but pump flow is 21.1 gpm | 79.9 lpm, pressure is 2900 psi | 200.0 bar, system type is closed center load-sensing, and lift is listed as 10228 lbs | 4639 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T5.140 Dynamic/Auto Command hydraulics feel fast or slow?
The useful speed clue is 21.1 gpm | 79.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland T5.140 Dynamic/Auto Command hydraulic pressure tell you?
The pressure spec is 2900 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland T5.140 Dynamic/Auto Command?
On the New Holland T5.140 Dynamic/Auto Command, 21.1 gpm | 79.9 lpm pump flow points to quicker loader and cylinder movement, 2,900 psi pressure affects force more than speed, and 10,228 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T5.140 Dynamic/Auto Command?
For implement matching, the useful checks are 21.1 gpm flow, 2,900 psi pressure, 10,228 lb listed lift, and 4 Optional remote/valve listing. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T5.140 Dynamic/Auto Command rear lift capacity strong?
The listed lift figure is 10228 lbs | 4639 kg, above the 7,000 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the New Holland T5.140 Dynamic/Auto Command hydraulic remotes enough?
The New Holland T5.140 Dynamic/Auto Command remote/valve listing is 4 Optional. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T5.140 Dynamic/Auto Command hydraulics handle long hydraulic jobs?
The useful heat clues are 21.1 gpm flow, 2,900 psi pressure, and about 35.7 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland T5.140 Dynamic/Auto Command make on paper?
Using 2,900 psi and 21.1 gpm, the rough pressure-flow estimate is about 35.7 hydraulic hp. That is a serious hydraulic power figure for demanding hydraulic functions. It is a comparison number, not engine horsepower.
What do the New Holland T5.140 Dynamic/Auto Command hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic draft control, and listed lift is 10228 lbs | 4639 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
