The New Holland T5.115 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10 gpm | 37.9 lpm, hydraulic type is open center gear pumps, and valves/remotes are listed as 2 to 3.
Hydraulic Flow10 gpm | 37.9 lpm
Hydraulic Typeopen center gear pumps
Valves / Remotes2 to 3
Lift Capacity6392 lbs | 2899 kg
New Holland T5.115 Hydraulic Capacity & Flow Specs
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland T5.115 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Hydraulic wet disc brakes
Differential lock
Electro-hydraulic rear. Limited slip front
New Holland T5.115 Hydraulic Capacity FAQ
Why is the New Holland T5.115 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland T5.115, but steering flow is 10 gpm | 37.9 lpm, system type is open center gear pumps, and lift is listed as 6392 lbs | 2899 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland T5.115 hydraulics feel fast or slow?
The useful speed clue is 10 gpm | 37.9 lpm steering flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the New Holland T5.115?
On the New Holland T5.115, 10 gpm | 37.9 lpm steering flow points to slower loader and cylinder movement and 6,392 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland T5.115?
For implement matching, the useful checks are 10 gpm flow, 6,392 lb listed lift, 2 to 3 remote/valve listing, and II hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland T5.115 rear lift capacity strong?
The listed lift figure is 6392 lbs | 2899 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the New Holland T5.115 hydraulic remotes enough?
The New Holland T5.115 remote/valve listing is 2 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the New Holland T5.115 hydraulics handle long hydraulic jobs?
The useful heat clues are 10 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the New Holland T5.115 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic draft control, and listed lift is 6392 lbs | 2899 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland T5.115 use?
The hydraulic system is listed as open center gear pumps with 10 gpm | 37.9 lpm steering flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the New Holland T5.115 hydraulics?
For service planning, the system is listed as open center gear pumps and flow is listed at 10 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
