The Case IH Farmall 115U tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16.1 gpm | 60.9 lpm, hydraulic type is open center, and valves/remotes are listed as 2 to 3.
Hydraulic Flow16.1 gpm | 60.9 lpm
Hydraulic Typeopen center
Valves / Remotes2 to 3
Lift Capacity6393 lbs | 2899 kg
Case IH Farmall 115U Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
16.1 gpm | 60.9 lpm
Steering flow
10 gpm | 37.9 lpm
Hydraulic valves
2 to 3
Case IH Farmall 115U Hitch, Remote & Lift Specs
Rear hitch type
II
Rear hitch control
electronic draft control
Rear lift at ends
adjustable lbs 0 kg
Rear lift at 24 inches
6393 lbs | 2899 kg
Drawbar category
Cat. II, swinging
Case IH Farmall 115U Useful Hydraulic Calculations
Steering flow vs pump flow
62.1% of listed pump flow
Rear lift per pump gpm
397.1 lb per gpm
Case IH Farmall 115U Hydraulic Comparison Charts
Pump flow comparison
This model
16.1 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
6,393 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 115U Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Hydraulic wet disc brakes
Case IH Farmall 115U Hydraulic Capacity FAQ
Why is the Case IH Farmall 115U hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 115U, but pump flow is 16.1 gpm | 60.9 lpm, system type is open center, and lift is listed as 6393 lbs | 2899 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 115U hydraulics feel fast or slow?
The useful speed clue is 16.1 gpm | 60.9 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What matters most for loader speed on the Case IH Farmall 115U?
On the Case IH Farmall 115U, 16.1 gpm | 60.9 lpm pump flow points to quicker loader and cylinder movement and 6,393 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 115U?
For implement matching, the useful checks are 16.1 gpm flow, 6,393 lb listed lift, 2 to 3 remote/valve listing, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 115U rear lift capacity strong?
The listed lift figure is 6393 lbs | 2899 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Case IH Farmall 115U hydraulic remotes enough?
The Case IH Farmall 115U remote/valve listing is 2 to 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Farmall 115U hydraulics handle long hydraulic jobs?
The useful heat clues are 16.1 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall 115U hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II, hitch control is electronic draft control, and listed lift is 6393 lbs | 2899 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall 115U use?
The hydraulic system is listed as open center with 16.1 gpm | 60.9 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall 115U hydraulics?
For service planning, the system is listed as open center and flow is listed at 16.1 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
