The Massey Ferguson 4708 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pressure is 2901 psi | 200.0 bar, hydraulic type is open center, and valves/remotes are listed as 1.
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 4708 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 4708, but pressure is 2901 psi | 200.0 bar, system type is open center, and lift is listed as 6614 lbs | 3000 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
What does the Massey Ferguson 4708 hydraulic pressure tell you?
The pressure spec is 2901 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 4708?
On the Massey Ferguson 4708, pump/remote flow is not listed here, so loader speed cannot be judged from this page alone, 2,901 psi pressure affects force more than speed, and 6,614 lb listed lift is the number to watch for implement weight. You need the pump-flow or remote-flow spec to judge speed; pressure and lift only tell you force/capacity.
How do you judge hydraulic implement fit on the Massey Ferguson 4708?
For implement matching, the useful checks are 2,901 psi pressure, 6,614 lb listed lift, and 1 remote/valve listing. That combination is normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 4708 rear lift capacity strong?
The listed lift figure is 6614 lbs | 3000 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Massey Ferguson 4708 hydraulic remotes enough?
The Massey Ferguson 4708 lists 1 for valves/remotes. That is on the limited side, so hydraulic top links, loaders, blades or implements with extra functions may need more plumbing.
What hydraulic system does the Massey Ferguson 4708 use?
The hydraulic system is listed as open center and 2901 psi | 200.0 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 4708 hydraulics?
For service planning, the system is listed as open center and pressure is listed at 2,901 psi. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
