The Massey Ferguson 6445 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15.3 gpm | 57.9 lpm, hydraulic pressure is 2901 psi | 200.0 bar, and hydraulic type is open center.
about 25.9 hydraulic hp from listed pressure and pump flow
Massey Ferguson 6445 Hydraulic Comparison Charts
Pump flow comparison
This model
15.3 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,901 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 6445 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 6445, but pump flow is 15.3 gpm | 57.9 lpm, pressure is 2901 psi | 200.0 bar, and system type is open center. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 6445 hydraulics feel fast or slow?
The useful speed clue is 15.3 gpm | 57.9 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Massey Ferguson 6445 hydraulic pressure tell you?
The pressure spec is 2901 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 6445?
On the Massey Ferguson 6445, 15.3 gpm | 57.9 lpm pump flow is around normal for loader/cylinder speed and 2,901 psi pressure affects force more than speed. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 6445?
For implement matching, the useful checks are 15.3 gpm flow, 2,901 psi pressure, and 2 to 4 remote/valve listing. That combination is in the normal flow range for this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Are the Massey Ferguson 6445 hydraulic remotes enough?
The Massey Ferguson 6445 remote/valve listing is 2 to 4. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 6445 hydraulics handle long hydraulic jobs?
The useful heat clues are 15.3 gpm flow, 2,901 psi pressure, and about 25.9 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 6445 make on paper?
Using 2,901 psi and 15.3 gpm, the rough pressure-flow estimate is about 25.9 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What hydraulic system does the Massey Ferguson 6445 use?
The hydraulic system is listed as open center with 15.3 gpm | 57.9 lpm pump flow and 2901 psi | 200.0 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Massey Ferguson 6445 hydraulics?
For service planning, the system is listed as open center, pressure is listed at 2,901 psi, and flow is listed at 15.3 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
