The Massey Ferguson 4710M tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 17.2 gpm | 65.1 lpm, and hydraulic pressure is 2901 psi | 200.0 bar.
about 29.1 hydraulic hp from listed pressure and pump flow
Massey Ferguson 4710M Hydraulic Comparison Charts
Pump flow comparison
This model
17.2 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,901 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
6,614 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 4710M hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 4710M, but pump flow is 17.2 gpm | 65.1 lpm, pressure is 2901 psi | 200.0 bar, and lift is listed as 6614 lbs | 3000 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 4710M hydraulics feel fast or slow?
The useful speed clue is 17.2 gpm | 65.1 lpm pump flow, above the 14 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the Massey Ferguson 4710M hydraulic pressure tell you?
The pressure spec is 2901 psi | 200.0 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 4710M?
On the Massey Ferguson 4710M, 17.2 gpm | 65.1 lpm pump flow points to quicker loader and cylinder movement, 2,901 psi pressure affects force more than speed, and 6,614 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 4710M?
For implement matching, the useful checks are 17.2 gpm flow, 2,901 psi pressure, 6,614 lb listed lift, and II hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 4710M rear lift capacity strong?
The listed lift figure is 6614 lbs | 3000 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Will the Massey Ferguson 4710M hydraulics handle long hydraulic jobs?
The useful heat clues are 17.2 gpm flow, 2,901 psi pressure, and about 29.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 4710M make on paper?
Using 2,901 psi and 17.2 gpm, the rough pressure-flow estimate is about 29.1 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 4710M hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 6614 lbs | 3000 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 4710M hydraulics?
For service planning, pressure is listed at 2,901 psi and flow is listed at 17.2 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
