The Massey Ferguson 3505 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 15 gpm | 56.8 lpm, hydraulic pressure is 2539 psi | 175.1 bar, and hydraulic type is open center.
about 22.2 hydraulic hp from listed pressure and pump flow
Massey Ferguson 3505 Hydraulic Comparison Charts
Pump flow comparison
This model
15 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Hydraulic pressure comparison
This model
2,539 psi
Average
2,600 psi
Low
2,100 psi
High
3,200 psi
Rear lift comparison
This model
7,611 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Why is the Massey Ferguson 3505 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 3505, but pump flow is 15 gpm | 56.8 lpm, pressure is 2539 psi | 175.1 bar, system type is open center, and lift is listed as 7,611 lbs | 3452 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 3505 hydraulics feel fast or slow?
The useful speed clue is 15 gpm | 56.8 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Massey Ferguson 3505 hydraulic pressure tell you?
The pressure spec is 2539 psi | 175.1 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 3505?
On the Massey Ferguson 3505, 15 gpm | 56.8 lpm pump flow is around normal for loader/cylinder speed, 2,539 psi pressure affects force more than speed, and 7,611 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 3505?
For implement matching, the useful checks are 15 gpm flow, 2,539 psi pressure, 7,611 lb listed lift, and 2 or 3 remote/valve listing. That combination is in the normal flow range for this size group and normal on pressure for the class, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 3505 rear lift capacity strong?
The listed lift figure is 7,611 lbs | 3452 kg, close to the 7,000 lb benchmark. It is in the normal range, so implement length and ballast matter as much as the headline lift number.
Are the Massey Ferguson 3505 hydraulic remotes enough?
The Massey Ferguson 3505 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 3505 hydraulics handle long hydraulic jobs?
The useful heat clues are 15 gpm flow, 2,539 psi pressure, and about 22.2 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 3505 make on paper?
Using 2,539 psi and 15 gpm, the rough pressure-flow estimate is about 22.2 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 3505 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 7,611 lbs | 3452 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
