The Massey Ferguson 699 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 10 gpm | 37.9 lpm, hydraulic pressure is 2500 psi | 172.4 bar, and hydraulic type is open center.
Massey Ferguson 699 Hydraulic Capacity & Flow Specs
| Hydraulic type | open center |
|---|---|
| Hydraulic pressure | 2500 psi | 172.4 bar |
| Pump flow | 10 gpm | 37.9 lpm |
| Total hydraulic flow | 17 gpm | 64.3 lpm |
| Hydraulic valves | 2 or 3 |
Massey Ferguson 699 Hitch, Remote & Lift Specs
| Rear hitch type | II |
|---|---|
| Rear lift at 24 inches | 5259 lbs | 2385 kg |
Massey Ferguson 699 Useful Hydraulic Calculations
| Total flow vs pump flow | 170% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 525.9 lb per gpm |
| Estimated hydraulic horsepower | about 14.6 hydraulic hp from listed pressure and pump flow |
Massey Ferguson 699 Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 699 Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Power steering |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Differential lock | mechanical rear |
Massey Ferguson 699 Hydraulic Capacity FAQ
Why is the Massey Ferguson 699 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 699, but pump flow is 10 gpm | 37.9 lpm, pressure is 2500 psi | 172.4 bar, system type is open center, and lift is listed as 5259 lbs | 2385 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 699 hydraulics feel fast or slow?
The useful speed clue is 10 gpm | 37.9 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 699 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 699?
On the Massey Ferguson 699, 10 gpm | 37.9 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 5,259 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 699?
For implement matching, the useful checks are 10 gpm flow, 2,500 psi pressure, 5,259 lb listed lift, and 2 or 3 remote/valve listing. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 699 rear lift capacity strong?
The listed lift figure is 5259 lbs | 2385 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Massey Ferguson 699 hydraulic remotes enough?
The Massey Ferguson 699 remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 699 hydraulics handle long hydraulic jobs?
The useful heat clues are 10 gpm flow, 2,500 psi pressure, and about 14.6 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 699 make on paper?
Using 2,500 psi and 10 gpm, the rough pressure-flow estimate is about 14.6 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 699 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II and listed lift is 5259 lbs | 2385 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
