The New Holland Boomer 3040 tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 9.8 gpm | 37.1 lpm, hydraulic pressure is 2500 psi | 172.4 bar, and hydraulic type is open center.
Hydraulic Flow9.8 gpm | 37.1 lpm
Pressure2500 psi | 172.4 bar
Hydraulic Typeopen center
Lift Capacity2,330 lbs | 1056 kg
New Holland Boomer 3040 Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Hydraulic pressure
2500 psi | 172.4 bar
Pump flow
9.8 gpm | 37.1 lpm
Total hydraulic flow
14.9 gpm | 56.4 lpm
Steering flow
5.1 gpm | 19.3 lpm
New Holland Boomer 3040 Hitch, Remote & Lift Specs
Rear hitch type
I
Rear lift at ends
3,275 lbs | 1485 kg
Rear lift at 24 inches
2,330 lbs | 1056 kg
New Holland Boomer 3040 Useful Hydraulic Calculations
Total flow vs pump flow
152% of listed pump flow
Steering flow vs pump flow
52% of listed pump flow
Rear lift per pump gpm
237.8 lb per gpm
Estimated hydraulic horsepower
about 14.3 hydraulic hp from listed pressure and pump flow
New Holland Boomer 3040 Hydraulic Comparison Charts
Pump flow comparison
This model
9.8 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Hydraulic pressure comparison
This model
2,500 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
2,330 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
New Holland Boomer 3040 Steering, Brakes & Mechanical Hydraulic Notes
Steering
hydrostatic power
Brakes
Mechanical wet disc brakes
New Holland Boomer 3040 Hydraulic Capacity FAQ
Why is the New Holland Boomer 3040 hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the New Holland Boomer 3040, but pump flow is 9.8 gpm | 37.1 lpm, pressure is 2500 psi | 172.4 bar, system type is open center, and lift is listed as 2,330 lbs | 1056 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the New Holland Boomer 3040 hydraulics feel fast or slow?
The useful speed clue is 9.8 gpm | 37.1 lpm pump flow, above the 8 gpm benchmark for this group. That is the spec that helps loader cycle speed, remote response and hydraulic implement speed.
What does the New Holland Boomer 3040 hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,300 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the New Holland Boomer 3040?
On the New Holland Boomer 3040, 9.8 gpm | 37.1 lpm pump flow points to quicker loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 2,330 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the New Holland Boomer 3040?
For implement matching, the useful checks are 9.8 gpm flow, 2,500 psi pressure, 2,330 lb listed lift, and I hitch. That combination is fast enough on paper for quicker cylinder movement than many tractors in this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the New Holland Boomer 3040 rear lift capacity strong?
The listed lift figure is 2,330 lbs | 1056 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Will the New Holland Boomer 3040 hydraulics handle long hydraulic jobs?
The useful heat clues are 9.8 gpm flow, 2,500 psi pressure, and about 14.3 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the New Holland Boomer 3040 make on paper?
Using 2,500 psi and 9.8 gpm, the rough pressure-flow estimate is about 14.3 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the New Holland Boomer 3040 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I and listed lift is 2,330 lbs | 1056 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the New Holland Boomer 3040 use?
The hydraulic system is listed as open center with 9.8 gpm | 37.1 lpm pump flow and 2500 psi | 172.4 bar pressure. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official newholland.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
