The Massey Ferguson 152S tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 4.4 gpm | 16.7 lpm, and hydraulic pressure is 2500 psi | 172.4 bar.
Massey Ferguson 152S Hydraulic Capacity & Flow Specs
| Hydraulic pressure | 2500 psi | 172.4 bar |
|---|---|
| Pump flow | 4.4 gpm | 16.7 lpm |
Massey Ferguson 152S Hitch, Remote & Lift Specs
| Rear hitch type | II/I |
|---|---|
| Rear hitch control | position and draft control |
| Rear lift at ends | 4044 lbs | 1834 kg |
Massey Ferguson 152S Useful Hydraulic Calculations
| Rear lift per pump gpm | 919.1 lb per gpm |
|---|---|
| Estimated hydraulic horsepower | about 6.4 hydraulic hp from listed pressure and pump flow |
Massey Ferguson 152S Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 152S Steering, Brakes & Mechanical Hydraulic Notes
| Steering | Manual steering |
|---|---|
| Brakes | Wet disc brakes |
Massey Ferguson 152S Hydraulic Capacity FAQ
Why is the Massey Ferguson 152S hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Massey Ferguson 152S, but pump flow is 4.4 gpm | 16.7 lpm, pressure is 2500 psi | 172.4 bar, and lift is listed as 4044 lbs | 1834 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Massey Ferguson 152S hydraulics feel fast or slow?
The useful speed clue is 4.4 gpm | 16.7 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What does the Massey Ferguson 152S hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 152S?
On the Massey Ferguson 152S, 4.4 gpm | 16.7 lpm pump flow points to slower loader and cylinder movement, 2,500 psi pressure affects force more than speed, and 4,044 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 152S?
For implement matching, the useful checks are 4.4 gpm flow, 2,500 psi pressure, 4,044 lb listed lift, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 152S rear lift capacity strong?
The listed lift figure is 4044 lbs | 1834 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Massey Ferguson 152S hydraulics handle long hydraulic jobs?
The useful heat clues are 4.4 gpm flow, 2,500 psi pressure, and about 6.4 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Massey Ferguson 152S make on paper?
Using 2,500 psi and 4.4 gpm, the rough pressure-flow estimate is about 6.4 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 152S hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is position and draft control, and listed lift is 4044 lbs | 1834 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Massey Ferguson 152S hydraulics?
For service planning, pressure is listed at 2,500 psi and flow is listed at 4.4 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
