The Massey Ferguson 1180 tractor hydraulic capacity is 8.5 gal | 32.2 L, pump flow is 8.2 gpm | 31.0 lpm, and hydraulic pressure is 2417 psi | 166.7 bar.
about 11.6 hydraulic hp from listed pressure and pump flow
Metric capacity vs pump flow
32.2 L capacity with 8.2 gpm pump flow
Massey Ferguson 1180 Hydraulic Comparison Charts
Hydraulic capacity comparison
This model
8.5 gal
Average
6.5 gal
Low
2.5 gal
High
12 gal
Pump flow comparison
This model
8.2 gpm
Average
8 gpm
Low
3.5 gpm
High
14 gpm
Hydraulic pressure comparison
This model
2,417 psi
Average
2,300 psi
Low
1,800 psi
High
3,000 psi
Rear lift comparison
This model
4,045 lb
Average
1,800 lb
Low
800 lb
High
3,200 lb
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Massey Ferguson 1180 Hydraulic Capacity FAQ
Is the Massey Ferguson 1180 hydraulic capacity big or small for its size?
The Massey Ferguson 1180 lists 8.5 gal | 32.2 L of hydraulic capacity, above the 6.5 gal benchmark for this group. That bigger oil volume is useful when the tractor is doing longer hydraulic jobs because the system has more fluid in reserve.
Will the Massey Ferguson 1180 hydraulics feel fast or slow?
The useful speed clue is 8.2 gpm | 31.0 lpm pump flow, close to the 8 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Massey Ferguson 1180 hydraulic pressure tell you?
The pressure spec is 2417 psi | 166.7 bar, close to the 2,300 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Massey Ferguson 1180?
On the Massey Ferguson 1180, 8.2 gpm | 31.0 lpm pump flow is around normal for loader/cylinder speed, 2,417 psi pressure affects force more than speed, and 4,045 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Massey Ferguson 1180?
For implement matching, the useful checks are 8.2 gpm flow, 2,417 psi pressure, 4,045 lb listed lift, and 0 to 2 remote/valve listing. That combination is in the normal flow range for this size group, normal on pressure for the class, and better suited to heavier mounted implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Massey Ferguson 1180 rear lift capacity strong?
The listed lift figure is 4045 lbs | 1834 kg, above the 1,800 lb benchmark. That points to a stronger hitch setup, but ballast, tire grip and implement length can still be the real limit.
Are the Massey Ferguson 1180 hydraulic remotes enough?
The Massey Ferguson 1180 remote/valve listing is 0 to 2. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Massey Ferguson 1180 hydraulics handle long hydraulic jobs?
The useful heat clues are 8.5 gal of hydraulic capacity, 8.2 gpm flow, 2,417 psi pressure, and about 11.6 hydraulic hp by the pressure-flow estimate. That is a fairly normal flow-to-oil-volume relationship for mixed tractor work.
How much hydraulic power does the Massey Ferguson 1180 make on paper?
Using 2,417 psi and 8.2 gpm, the rough pressure-flow estimate is about 11.6 hydraulic hp. That is a modest hydraulic power figure, so huge hydraulic loads are not the point of this setup. It is a comparison number, not engine horsepower.
What do the Massey Ferguson 1180 hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is I, hitch control is position, draft, and response control, and listed lift is 4045 lbs | 1834 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official masseyferguson.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
