The Case IH Farmall 100C tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 16..9 gpm | 60.6 lpm, hydraulic type is open center, and valves/remotes are listed as 2 or 3.
Hydraulic Flow16..9 gpm | 60.6 lpm
Hydraulic Typeopen center
Valves / Remotes2 or 3
Lift Capacity4339 lbs | 1968 kg
Case IH Farmall 100C Hydraulic Capacity & Flow Specs
Hydraulic type
open center
Pump flow
16..9 gpm | 60.6 lpm
Hydraulic valves
2 or 3
Case IH Farmall 100C Hitch, Remote & Lift Specs
Rear hitch type
II/I
Rear hitch control
top link draft sensing
Rear lift at 24 inches
4339 lbs | 1968 kg
Drawbar category
swinging extendable drawbar
Case IH Farmall 100C Useful Hydraulic Calculations
Rear lift per pump gpm
482.1 lb per gpm
Case IH Farmall 100C Hydraulic Comparison Charts
Pump flow comparison
This model
9 gpm
Average
14 gpm
Low
6 gpm
High
28 gpm
Rear lift comparison
This model
4,339 lb
Average
7,000 lb
Low
3,000 lb
High
12,000 lb
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH Farmall 100C Steering, Brakes & Mechanical Hydraulic Notes
Steering
Power steering
Brakes
Wet disc brakes
Case IH Farmall 100C Hydraulic Capacity FAQ
Why is the Case IH Farmall 100C hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH Farmall 100C, but pump flow is 16..9 gpm | 60.6 lpm, system type is open center, and lift is listed as 4339 lbs | 1968 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH Farmall 100C hydraulics feel fast or slow?
The useful speed clue is 16..9 gpm | 60.6 lpm pump flow, below the 14 gpm benchmark for this group. Expect hydraulic functions to be steady rather than fast, especially with loaders or big cylinders.
What matters most for loader speed on the Case IH Farmall 100C?
On the Case IH Farmall 100C, 16..9 gpm | 60.6 lpm pump flow points to slower loader and cylinder movement and 4,339 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH Farmall 100C?
For implement matching, the useful checks are 9 gpm flow, 4,339 lb listed lift, 2 or 3 remote/valve listing, and II/I hitch. That combination is more likely to feel slow on loaders, rear remotes and large cylinders and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH Farmall 100C rear lift capacity strong?
The listed lift figure is 4339 lbs | 1968 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Are the Case IH Farmall 100C hydraulic remotes enough?
The Case IH Farmall 100C remote/valve listing is 2 or 3. Because that wording may be optional or configuration-dependent, treat it as a setup check before buying an implement that needs rear hydraulic outlets.
Will the Case IH Farmall 100C hydraulics handle long hydraulic jobs?
The useful heat clues are 9 gpm flow. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
What do the Case IH Farmall 100C hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is top link draft sensing, and listed lift is 4339 lbs | 1968 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What hydraulic system does the Case IH Farmall 100C use?
The hydraulic system is listed as open center with 16..9 gpm | 60.6 lpm pump flow. The system type tells you how the hydraulics are arranged; the flow and pressure numbers tell you more about real-world speed and force.
What should you check before servicing the Case IH Farmall 100C hydraulics?
For service planning, the system is listed as open center and flow is listed at 9 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Official information note
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
