The New Holland TK4060 tractor engine horsepower is 99.2 hp | 74.0 kW, and PTO horsepower is 86 hp | 64.1 kW.
Engine HP99.2 hp | 74.0 kW
PTO HP86 hp | 64.1 kW
PTO Transfer86.7%
Torque302.4 lb-ft | 410.1 Nm
Displacement274.6 ci | 4.5 L
New Holland TK4060 Horsepower Specs
Engine gross horsepower
99.2 hp | 74.0 kW
PTO horsepower claimed
86 hp | 64.1 kW
New Holland TK4060 Useful Horsepower Calculations
PTO-to-engine power transfer
86.7% of engine hp reaches the PTO
Engine size per PTO horsepower
3.2 ci per PTO hp
PTO horsepower per liter
19.1 PTO hp per L
Engine size per engine horsepower
2.8 ci per engine hp
Engine horsepower per liter
22 engine hp per L
Torque per PTO horsepower
3.5 lb-ft per PTO hp
Rated speed per PTO horsepower
29.1 rpm per PTO hp
New Holland TK4060 Engine Specs
Engine type
turbocharged intercooled diesel
Displacement
274.6 ci | 4.5 L
Bore and stroke
4.094×5.196 inches | 104 x 132 mm
Rated RPM
2500
Torque
302.4 lb-ft | 410.1 Nm
Torque RPM
1300
New Holland TK4060 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
New Holland TK4060 Horsepower Comparison Charts
Engine horsepower comparison
This model
99.2 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
86 hp
Average
65 hp
Low
35 hp
High
105 hp
Displacement comparison
This model
274.6 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
302.4 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,500 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
3.2 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
New Holland TK4060 Horsepower FAQ
How much horsepower does the New Holland TK4060 have?
The listed engine output is 99.2 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 99.2 hp.
How much PTO horsepower does the New Holland TK4060 have?
The listed PTO output is 86 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 86 hp.
How much engine power reaches the PTO on the New Holland TK4060?
The PTO-to-engine transfer works out to 86.7%, from 99.2 engine hp to 86 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the New Holland TK4060 engine?
The engine displacement is 274.6 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the New Holland TK4060 engine stressed for its PTO horsepower?
The engine has about 3.2 cubic inches per PTO hp, using 274.6 ci and 86 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the New Holland TK4060 make?
The output density is about 19.1 PTO hp per liter, using 86 PTO hp and 4.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the New Holland TK4060 have?
The listed torque is 302.4 lb-ft, above the 240 lb-ft benchmark average. The 302.4 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the New Holland TK4060 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.5 lb-ft per PTO hp, using 302.4 lb-ft and 86 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the New Holland TK4060 rated at?
The rated speed is 2,500 rpm, above the 2,200 rpm benchmark average. A higher 2,500 rpm rating can make power well but may feel busier under load.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official newholland.com website before buying parts, sizing implements or making repair decisions.
