The Case IH Maxxum 130 tractor engine horsepower is 130 hp | 96.9 kW, PTO horsepower is 110 hp | 82.0 kW, and the drawbar horsepower is 89.2 hp | 66.5 kW.
Engine HP130 hp | 96.9 kW
PTO HP110 hp | 82.0 kW
Drawbar HP89.2 hp | 66.5 kW
PTO Transfer84.6%
Torque438 lb-ft | 593.9 Nm
Displacement273.7 ci | 4.5 L
Case IH Maxxum 130 Horsepower Specs
Engine gross horsepower
130 hp | 96.9 kW
PTO horsepower claimed
110 hp | 82.0 kW
PTO horsepower tested
121.4 hp | 90.5 kW
Drawbar horsepower tested
89.2 hp | 66.5 kW
Case IH Maxxum 130 Useful Horsepower Calculations
PTO-to-engine power transfer
84.6% of engine hp reaches the PTO
Drawbar-to-engine power transfer
68.6% of engine hp reaches the drawbar
Drawbar-to-PTO power ratio
81.1% drawbar hp vs PTO hp
Engine size per PTO horsepower
2.5 ci per PTO hp
PTO horsepower per liter
24.4 PTO hp per L
Engine size per engine horsepower
2.1 ci per engine hp
Engine horsepower per liter
28.9 engine hp per L
Torque per PTO horsepower
4 lb-ft per PTO hp
Rated speed per PTO horsepower
20 rpm per PTO hp
Case IH Maxxum 130 Engine Specs
Engine model
year
Engine type
turbocharged aftercooled diesel
Displacement
273.7 ci | 4.5 L
Bore and stroke
4.094×5.197 inches | 104 x 132 mm
Compression
16.5:1
Emissions
Tier 3
Rated RPM
2200
Torque
438 lb-ft | 593.9 Nm
Torque RPM
1400
Case IH Maxxum 130 Fuel, Cooling, Starting & Service Specs
Starter volts
12
Battery volts
12
Firing order
1-3-4-2
Case IH Maxxum 130 Horsepower Comparison Charts
Engine horsepower comparison
This model
130 hp
Average
80 hp
Low
45 hp
High
120 hp
PTO horsepower comparison
This model
110 hp
Average
65 hp
Low
35 hp
High
105 hp
Drawbar horsepower comparison
This model
89.2 hp
Average
55 hp
Low
30 hp
High
95 hp
Displacement comparison
This model
273.7 ci
Average
260 ci
Low
150 ci
High
380 ci
Torque comparison
This model
438 lb-ft
Average
240 lb-ft
Low
120 lb-ft
High
420 lb-ft
Rated RPM comparison
This model
2,200 rpm
Average
2,200 rpm
Low
1,800 rpm
High
2,700 rpm
Engine size per PTO HP
This model
2.5 ci/hp
Average
3.5 ci/hp
Low
2.2 ci/hp
High
5.8 ci/hp
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Maxxum 130 Horsepower FAQ
How much horsepower does the Case IH Maxxum 130 have?
The listed engine output is 130 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 130 hp.
How much PTO horsepower does the Case IH Maxxum 130 have?
The listed PTO output is 110 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 110 hp.
How much drawbar horsepower does the Case IH Maxxum 130 have?
The listed drawbar output is 89.2 hp, above the 55 hp benchmark average. That makes the 89.2 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How much engine power reaches the PTO on the Case IH Maxxum 130?
The PTO-to-engine transfer works out to 84.6%, from 130 engine hp to 110 PTO hp. That is a normal usable range for judging PTO implement fit.
How efficient is the Case IH Maxxum 130 for pulling work?
The drawbar-to-engine transfer is about 68.6%, from 130 engine hp to 89.2 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
Is the Case IH Maxxum 130 better judged by PTO hp or drawbar hp?
The drawbar output is about 81.1% of PTO output, comparing 89.2 drawbar hp with 110 PTO hp. That helps separate pulling ability from PTO implement ability.
How big is the Case IH Maxxum 130 engine?
The engine displacement is 273.7 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH Maxxum 130 engine stressed for its PTO horsepower?
The engine has about 2.5 cubic inches per PTO hp, using 273.7 ci and 110 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Maxxum 130 make?
The output density is about 24.4 PTO hp per liter, using 110 PTO hp and 4.5 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
