The Case IH Farmall 60A tractor engine horsepower is 60 hp | 44.7 kW, and PTO horsepower is 51 hp | 38.0 kW.
Case IH Farmall 60A Horsepower Specs
| Engine gross horsepower | 60 hp | 44.7 kW |
|---|---|
| PTO horsepower claimed | 51 hp | 38.0 kW |
| PTO horsepower tested | 59.54 hp | 44.4 kW |
Case IH Farmall 60A Useful Horsepower Calculations
| PTO-to-engine power transfer | 85% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.7 ci per PTO hp |
| PTO horsepower per liter | 23.2 PTO hp per L |
| Engine size per engine horsepower | 2.3 ci per engine hp |
| Engine horsepower per liter | 27.3 engine hp per L |
| Rated speed per PTO horsepower | 51 rpm per PTO hp |
Case IH Farmall 60A Engine Specs
| Engine type | turbocharged aftercooled diesel |
|---|---|
| Displacement | 135.9 ci | 2.2 L |
| Bore and stroke | 3.70×4.21 inches | 94 x 107 mm |
| Rated RPM | 2600 |
Case IH Farmall 60A Fuel, Cooling, Starting & Service Specs
| Starter volts | 12 |
|---|---|
| Battery volts | 12 |
Case IH Farmall 60A Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the compact and small utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH Farmall 60A Horsepower FAQ
How much horsepower does the Case IH Farmall 60A have?
The listed engine output is 60 hp, above the 35 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 60 hp.
How much PTO horsepower does the Case IH Farmall 60A have?
The listed PTO output is 51 hp, above the 28 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 51 hp.
How much engine power reaches the PTO on the Case IH Farmall 60A?
The PTO-to-engine transfer works out to 85%, from 60 engine hp to 51 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH Farmall 60A engine?
The engine displacement is 135.9 ci, above the 110 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
Is the Case IH Farmall 60A engine stressed for its PTO horsepower?
The engine has about 2.7 cubic inches per PTO hp, using 135.9 ci and 51 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH Farmall 60A make?
The output density is about 23.2 PTO hp per liter, using 51 PTO hp and 2.2 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
What rpm is the Case IH Farmall 60A rated at?
The rated speed is 2,600 rpm, close to the 2,400 rpm benchmark average. The 2,600 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
