The Case IH Farmall 60A dimensions found are: length is 129.5 inches | 328 cm, width is 67.5 inches | 171 cm, height is 92.7 inches | 235 cm, and wheelbase is 96.4 inches | 244 cm.
Length129.5 inches | 328 cm
Width67.5 inches | 171 cm
Height92.7 inches | 235 cm
Wheelbase96.4 inches | 244 cm
Case IH Farmall 60A Dimensions
Overall length
2WD: 129.5 inches | 328 cm | 4WD: 134 inches | 340 cm
Overall width
67.5 inches | 171 cm
Overall height
2WD: 92.7 inches | 235 cm | 4WD: 97.4 inches | 247 cm
Wheelbase
2WD: 96.4 inches | 244 cm | 4WD: 97.6 inches | 247 cm
Front tread
2WD: 56 to 77.6 inches | 142 to 197 cm | 4WD: 61.3 to 69.2 inches | 155 to 175 cm
Rear tread
52.6 to 68.4 inches | 133 to 173 cm
Case IH Farmall 60A Weight
2WD Weight
4442 lbs | 2014 kg
4WD Weight
5060 lbs | 2295 kg
Case IH Farmall 60A Tire Size Notes
Industrial front
12.5×18
Industrial rear
18.4×24
Case IH Farmall 60A Dimension Comparison Charts
Length comparison
This model
129.5 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
67.5 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
92.7 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
96.4 in
Average
86 in
Low
70 in
High
105 in
Weight comparison
This model
4,442 lbs
Average
5,500 lbs
Low
3,500 lbs
High
8,000 lbs
Floor space footprint
This model
61 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH Farmall 60A Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH Farmall 60A is about 129.5 inches | 328 cm long, about 67.5 inches | 171 cm wide, and about 92.7 inches | 235 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH Farmall 60A Dimensions FAQ
Is the Case IH Farmall 60A a long tractor?
The Case IH Farmall 60A has an average listed length at 129.5 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH Farmall 60A narrow enough for tight storage?
The listed width is middle-of-the-pack at 67.5 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH Farmall 60A tall for a shed or garage?
The listed height is about normal at 92.7 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH Farmall 60A need?
The bare footprint is about 61 sq ft from a 10.8 ft length and 5.6 ft width. That is below the 75 sq ft benchmark for this category.
Does the Case IH Farmall 60A have a short or long wheelbase?
The wheelbase is long for the category at 96.4 in, which is above the 86 in benchmark average. That points to a longer chassis stance.
Is the Case IH Farmall 60A heavy for its size?
The listed weight is light for the category at 4,442 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.
Will the Case IH Farmall 60A fit easily in storage?
The fit numbers are fairly normal for the category: length 129.5 in, width 67.5 in and height 92.7 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
