The Case IH CS 110 tractor engine horsepower is 103.6 hp | 77.3 kW, and PTO horsepower is 92.7 hp | 69.1 kW.
Case IH CS 110 Horsepower Specs
| Engine net horsepower | 103.6 hp | 77.3 kW |
|---|---|
| PTO horsepower claimed | 92.7 hp | 69.1 kW |
Case IH CS 110 Useful Horsepower Calculations
| PTO-to-engine power transfer | 89.5% of engine hp reaches the PTO |
|---|---|
| Engine size per PTO horsepower | 2.9 ci per PTO hp |
| PTO horsepower per liter | 21.1 PTO hp per L |
| Engine size per engine horsepower | 2.6 ci per engine hp |
| Engine horsepower per liter | 23.5 engine hp per L |
| Torque per PTO horsepower | 3.4 lb-ft per PTO hp |
| Rated speed per PTO horsepower | 24.8 rpm per PTO hp |
Case IH CS 110 Engine Specs
| Engine type | turbocharged diesel |
|---|---|
| Displacement | 268.5 ci | 4.4 L |
| Bore and stroke | 4.25×4.72 inches | 108 x 120 mm |
| Rated RPM | 2300 |
| Torque | 314.9 lb-ft | 427.0 Nm |
| Torque RPM | 1500 |
Case IH CS 110 Fuel, Cooling, Starting & Service Specs
| Operating RPM | 1850-2300 |
|---|
Case IH CS 110 Horsepower Comparison Charts
Engine horsepower comparison
PTO horsepower comparison
Displacement comparison
Torque comparison
Rated RPM comparison
Engine size per PTO HP
Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH CS 110 Horsepower FAQ
How much horsepower does the Case IH CS 110 have?
The listed engine output is 103.6 hp, above the 80 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 103.6 hp.
How much PTO horsepower does the Case IH CS 110 have?
The listed PTO output is 92.7 hp, above the 65 hp benchmark average. That is the number to use for mowers, balers, augers, pumps and other PTO tools that need up to about 92.7 hp.
How much engine power reaches the PTO on the Case IH CS 110?
The PTO-to-engine transfer works out to 89.5%, from 103.6 engine hp to 92.7 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH CS 110 engine?
The engine displacement is 268.5 ci, close to the 260 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH CS 110 engine stressed for its PTO horsepower?
The engine has about 2.9 cubic inches per PTO hp, using 268.5 ci and 92.7 PTO hp. That is a smaller-displacement, higher-output style result.
How much PTO horsepower per liter does the Case IH CS 110 make?
The output density is about 21.1 PTO hp per liter, using 92.7 PTO hp and 4.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH CS 110 have?
The listed torque is 314.9 lb-ft, above the 240 lb-ft benchmark average. The 314.9 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
Does the Case IH CS 110 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.4 lb-ft per PTO hp, using 314.9 lb-ft and 92.7 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH CS 110 rated at?
The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
