The Case IH 9210 tractor engine horsepower is 200 hp | 149.1 kW, and PTO horsepower is 168 hp | 125.3 kW.
Engine HP200 hp | 149.1 kW
PTO HP168 hp | 125.3 kW
PTO Transfer84%
Torque625 lb-ft | 847.5 Nm
Displacement504.5 ci | 8.3 L
Case IH 9210 Horsepower Specs
Engine horsepower
200 hp | 149.1 kW
PTO horsepower claimed
168 hp | 125.3 kW
Case IH 9210 Useful Horsepower Calculations
PTO-to-engine power transfer
84% of engine hp reaches the PTO
Engine size per PTO horsepower
3 ci per PTO hp
PTO horsepower per liter
20.2 PTO hp per L
Engine size per engine horsepower
2.5 ci per engine hp
Engine horsepower per liter
24.1 engine hp per L
Torque per PTO horsepower
3.7 lb-ft per PTO hp
Fuel tank per PTO horsepower
0.7 gal per PTO hp
Rated speed per PTO horsepower
12.5 rpm per PTO hp
Case IH 9210 Engine Specs
Engine type
turbocharged diesel
Displacement
504.5 ci | 8.3 L
Bore and stroke
4.488×5.315 inches | 114 x 135 mm
Compression
16.5:1
Rated RPM
2100
Torque
625 lb-ft | 847.5 Nm
Torque RPM
1500
Case IH 9210 Fuel, Cooling, Starting & Service Specs
Fuel capacity
115 gal | 435.3 L
Starter volts
12
Battery volts
12
Case IH 9210 Horsepower Comparison Charts
Engine horsepower comparison
This model
200 hp
Average
210 hp
Low
120 hp
High
380 hp
PTO horsepower comparison
This model
168 hp
Average
175 hp
Low
100 hp
High
320 hp
Displacement comparison
This model
504.5 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
625 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,100 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Engine size per PTO HP
This model
3 ci/hp
Average
3.3 ci/hp
Low
2 ci/hp
High
5.2 ci/hp
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH 9210 Horsepower FAQ
How much horsepower does the Case IH 9210 have?
The listed engine output is 200 hp, close to the 210 hp benchmark average. That puts the tractor in a normal working range for this benchmark group, with 200 hp as the main engine number.
How much PTO horsepower does the Case IH 9210 have?
The listed PTO output is 168 hp, close to the 175 hp benchmark average. Use 168 PTO hp as the practical implement-sizing number.
How much engine power reaches the PTO on the Case IH 9210?
The PTO-to-engine transfer works out to 84%, from 200 engine hp to 168 PTO hp. That is a normal usable range for judging PTO implement fit.
How big is the Case IH 9210 engine?
The engine displacement is 504.5 ci, close to the 520 ci benchmark average. It is close to the normal engine-size range for this horsepower class.
Is the Case IH 9210 engine stressed for its PTO horsepower?
The engine has about 3 cubic inches per PTO hp, using 504.5 ci and 168 PTO hp. That is close to the normal benchmark for this category.
How much PTO horsepower per liter does the Case IH 9210 make?
The output density is about 20.2 PTO hp per liter, using 168 PTO hp and 8.3 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.
How much torque does the Case IH 9210 have?
The listed torque is 625 lb-ft, close to the 700 lb-ft benchmark average. The 625 lb-ft figure is a normal torque result for this class.
Does the Case IH 9210 have good torque for its PTO horsepower?
The torque-to-PTO-power figure is about 3.7 lb-ft per PTO hp, using 625 lb-ft and 168 PTO hp. A higher number usually points to a slower, gruntier working feel.
What rpm is the Case IH 9210 rated at?
The rated speed is 2,100 rpm, close to the 2,100 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
