The Case IH 9190 tractor engine horsepower is 525 hp | 391.5 kW, and the drawbar horsepower is 420 hp | 313.2 kW.
Engine HP525 hp | 391.5 kW
Drawbar HP420 hp | 313.2 kW
Torque1575 lb-ft | 2135.7 Nm
Displacement1150 ci | 18.8 L
Case IH 9190 Horsepower Specs
Engine horsepower
525 hp | 391.5 kW
Drawbar horsepower claimed
420 hp | 313.2 kW
Case IH 9190 Useful Horsepower Calculations
Drawbar-to-engine power transfer
80% of engine hp reaches the drawbar
Engine size per engine horsepower
2.2 ci per engine hp
Engine horsepower per liter
27.9 engine hp per L
Case IH 9190 Engine Specs
Engine type
turbocharged aftercooled diesel
Displacement
1150 ci | 18.8 L
Bore and stroke
6.25×6.25 inches | 159 x 159 mm
Rated RPM
2100
Torque
1575 lb-ft | 2135.7 Nm
Torque RPM
1500
Case IH 9190 Fuel, Cooling, Starting & Service Specs
Fuel capacity
385 gal | 1457.2 L
Case IH 9190 Horsepower Comparison Charts
Engine horsepower comparison
This model
525 hp
Average
210 hp
Low
120 hp
High
380 hp
Drawbar horsepower comparison
This model
420 hp
Average
150 hp
Low
85 hp
High
280 hp
Displacement comparison
This model
1,150 ci
Average
520 ci
Low
360 ci
High
750 ci
Torque comparison
This model
1,575 lb-ft
Average
700 lb-ft
Low
350 lb-ft
High
1,250 lb-ft
Rated RPM comparison
This model
2,100 rpm
Average
2,100 rpm
Low
1,600 rpm
High
2,500 rpm
Benchmarks use practical low, average and high ranges for the large ag tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.
Case IH 9190 Horsepower FAQ
How much horsepower does the Case IH 9190 have?
The listed engine output is 525 hp, above the 210 hp benchmark average. That is a higher-power result, so ballast, tire setup and implement width matter if you want to use the full 525 hp.
How much drawbar horsepower does the Case IH 9190 have?
The listed drawbar output is 420 hp, above the 150 hp benchmark average. That makes the 420 hp drawbar number more useful than engine hp for tillage and heavy pulling.
How efficient is the Case IH 9190 for pulling work?
The drawbar-to-engine transfer is about 80%, from 525 engine hp to 420 drawbar hp. That gives a more grounded pulling estimate than engine horsepower alone.
How big is the Case IH 9190 engine?
The engine displacement is 1,150 ci, above the 520 ci benchmark average. Bigger displacement can help low-rpm pull and load-holding feel.
How much torque does the Case IH 9190 have?
The listed torque is 1,575 lb-ft, above the 700 lb-ft benchmark average. The 1,575 lb-ft figure is useful for lugging, loader work and heavy PTO load recovery.
What rpm is the Case IH 9190 rated at?
The rated speed is 2,100 rpm, close to the 2,100 rpm benchmark average. The 2,100 rpm figure is around normal for this class.
Official information note
Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.
