The Case IH 9210 specifications include engine power rated at 200 hp (149.1 kW), a full power shift transmission and a listed weight of 17,000 lbs (7,711 kg).
Case IH 9210 key specifications
| Engine power |
200 hp (149.1 kW) |
| PTO power |
168 hp (125.3 kW) |
| Displacement |
504.5 cu in (8.3 L) |
| Transmission |
full power shift |
| Fuel capacity |
115 gal (435.3 L) |
| Weight |
17,000 lbs (7,711 kg) |
| Wheelbase |
120.4 inches (305 cm) |
Case IH 9210 industry comparison
See how this tractor compares across up to six main specifications using the low, average and high values in this specifications database.
Engine power200 hp
Low 14.7 hpAverage 138.3 hpHigh 785 hp
PTO power168 hp
Low 13.7 hpAverage 132.4 hpHigh 530 hp
Displacement8.3 L
Low 0.7 LAverage 5.2 LHigh 18.8 L
Fuel capacity115 gal
Low 3.2 galAverage 72.6 galHigh 520 gal
Weight17,000 lbs
Low 1,311 lbsAverage 12,209.7 lbsHigh 61,200 lbs
Wheelbase120.4 in
Low 52.8 inAverage 99.8 inHigh 160 in
This model Industry average
Case IH 9210 power chart
Compare the available engine, PTO and drawbar power ratings.
Case IH 9210 capacity chart
Compare the tractor's listed fuel, hydraulic and service-fluid capacities.
Maximum fuel capacity435.3 L
Case IH 9210 dimensions chart
Compare the main listed tractor dimensions using centimetres.
Engine specifications
| Bore/Stroke |
4.488 × 5.315 inches (114 × 135 mm) |
| Rated RPM |
2,100 |
| Torque |
625 lb-ft (847.5 Nm) |
| Torque RPM |
1,500 |
| Compression |
16.5:1 |
| Air cleaner |
dual paper elements |
| Oil capacity |
22 qt (20.8 L) |
| Coolant capacity |
35.2 qt (33.3 L) |
| Starter volts |
12 |
Transmission options
| Gears |
12 forward and 3 reverse |
PTO and hitch
| Rear hitch category |
Category III (optional) |
| Hitch control |
draft control (optional) |
| Rear lift |
12,750 lbs (5,783 kg) |
| Rear PTO |
independent (optional) |
| Rear PTO speed |
1,000 rpm |
Hydraulics
| Hydraulic capacity |
18 gal (68.1 L) |
| Hydraulic type |
closed center |
| Hydraulic pressure |
2,500 psi (172.4 bar) |
| Valves |
4 |
| Total flow |
28 gpm (106.0 L/min) |
Mechanical specifications
| Steering |
hydrostatic power with articulation and front-axle steering |
Electrical specifications
| Electrical ground |
negative |
| Battery volts |
12 |
Dimensions and weight
| Length |
241.6 inches (613 cm) |
| Width |
119.5 inches (303 cm, minimum) |
| Exhaust height |
129.6 inches (329 cm) |
Tires and tread
| Front tread |
60 to 130 inches (152 to 330 cm) |
| Rear tread |
60 to 130 inches (152 to 330 cm) |
| Front tire |
18.4-38 |
| Rear tire |
18.4-38 |
Note: Industry comparison values are calculated from models in this specifications database. Specifications can vary by year, market, configuration, tires and optional equipment. For official specifications, check the official Case IH website or the tractor’s operator manual.
