Case IH 585XL Horsepower & PTO HP

Quick answer:

The Case IH 585XL tractor engine horsepower is 60 hp | 44.7 kW, and PTO horsepower is 53.4 hp | 39.8 kW.

Engine HP60 hp | 44.7 kW
PTO HP53.4 hp | 39.8 kW
PTO Transfer89%
Torque162.3 lb-ft | 220.1 Nm
Displacement206 ci | 3.4 L

Case IH 585XL Horsepower Specs

Engine horsepower 60 hp | 44.7 kW
PTO horsepower claimed 53.4 hp | 39.8 kW

Case IH 585XL Useful Horsepower Calculations

PTO-to-engine power transfer 89% of engine hp reaches the PTO
Engine size per PTO horsepower 3.9 ci per PTO hp
PTO horsepower per liter 15.7 PTO hp per L
Engine size per engine horsepower 3.4 ci per engine hp
Engine horsepower per liter 17.6 engine hp per L
Torque per PTO horsepower 3 lb-ft per PTO hp
Rated speed per PTO horsepower 43.1 rpm per PTO hp

Case IH 585XL Engine Specs

Displacement 206 ci | 3.4 L
Bore and stroke 3.88×4.37 inches | 99 x 111 mm
Compression 15:1
Rated RPM 2300
Torque 162.3 lb-ft | 220.1 Nm
Torque RPM 1400

Case IH 585XL Fuel, Cooling, Starting & Service Specs

Starter volts 12
Battery volts 12
Idle RPM 700-2560

Case IH 585XL Horsepower Comparison Charts

Engine horsepower comparison

This model

60 hp

Average

80 hp

Low

45 hp

High

120 hp

PTO horsepower comparison

This model

53.4 hp

Average

65 hp

Low

35 hp

High

105 hp

Displacement comparison

This model

206 ci

Average

260 ci

Low

150 ci

High

380 ci

Torque comparison

This model

162.3 lb-ft

Average

240 lb-ft

Low

120 lb-ft

High

420 lb-ft

Rated RPM comparison

This model

2,300 rpm

Average

2,200 rpm

Low

1,800 rpm

High

2,700 rpm

Engine size per PTO HP

This model

3.9 ci/hp

Average

3.5 ci/hp

Low

2.2 ci/hp

High

5.8 ci/hp

Benchmarks use practical low, average and high ranges for the utility tractor category. Use the operator manual and actual engine/tractor configuration before sizing implements or judging working power.

Case IH 585XL Horsepower FAQ

How much horsepower does the Case IH 585XL have?

The listed engine output is 60 hp, below the 80 hp benchmark average. That is a lower-power result, so the smarter match is lighter implements and jobs that do not demand more than about 60 hp.

How much PTO horsepower does the Case IH 585XL have?

The listed PTO output is 53.4 hp, below the 65 hp benchmark average. For real use, size PTO implements below or near 53.4 hp rather than using a bigger engine-horsepower number.

How much engine power reaches the PTO on the Case IH 585XL?

The PTO-to-engine transfer works out to 89%, from 60 engine hp to 53.4 PTO hp. That is a normal usable range for judging PTO implement fit.

How big is the Case IH 585XL engine?

The engine displacement is 206 ci, below the 260 ci benchmark average. Smaller displacement usually means less engine size behind each horsepower number.

Is the Case IH 585XL engine stressed for its PTO horsepower?

The engine has about 3.9 cubic inches per PTO hp, using 206 ci and 53.4 PTO hp. That is close to the normal benchmark for this category.

How much PTO horsepower per liter does the Case IH 585XL make?

The output density is about 15.7 PTO hp per liter, using 53.4 PTO hp and 3.4 L of displacement. Higher hp/L means more output squeezed from each liter; lower hp/L usually means a more relaxed engine tune.

How much torque does the Case IH 585XL have?

The listed torque is 162.3 lb-ft, below the 240 lb-ft benchmark average. With 162.3 lb-ft listed, gearing matters more when the tractor is loaded hard.

Does the Case IH 585XL have good torque for its PTO horsepower?

The torque-to-PTO-power figure is about 3 lb-ft per PTO hp, using 162.3 lb-ft and 53.4 PTO hp. A higher number usually points to a slower, gruntier working feel.

What rpm is the Case IH 585XL rated at?

The rated speed is 2,300 rpm, close to the 2,200 rpm benchmark average. The 2,300 rpm figure is around normal for this class.

Official information note

Horsepower and engine specs can vary by year, market, engine option, fuel system, test standard and tractor configuration. Check the operator manual, spec plate, parts book and official caseih.com website before buying parts, sizing implements or making repair decisions.