The Case IH 585XL tractor hydraulic oil capacity was not listed in the scraped specs, but hydraulic pump flow is 12.4 gpm | 46.9 lpm, and hydraulic pressure is 2500 psi | 172.4 bar.
Case IH 585XL Hydraulic Capacity & Flow Specs
| Hydraulic pressure | 2500 psi | 172.4 bar |
|---|---|
| Pump flow | 12.4 gpm | 46.9 lpm |
| Steering flow | 2.6 gpm | 9.8 lpm |
Case IH 585XL Hitch, Remote & Lift Specs
| Rear hitch type | II/I |
|---|---|
| Rear hitch control | Top link draft sensing |
| Rear lift | 4400 lbs | 1995 kg |
Case IH 585XL Useful Hydraulic Calculations
| Steering flow vs pump flow | 21% of listed pump flow |
|---|---|
| Rear lift per pump gpm | 354.8 lb per gpm |
| Estimated hydraulic horsepower | about 18.1 hydraulic hp from listed pressure and pump flow |
Case IH 585XL Hydraulic Comparison Charts
Pump flow comparison
Hydraulic pressure comparison
Rear lift comparison
Benchmarks use practical low, average and high ranges for the utility and row-crop tractor category. These are comparison guides only; use the operator manual and exact tractor configuration before buying parts, oil, loaders or hydraulic implements.
Case IH 585XL Steering, Brakes & Mechanical Hydraulic Notes
| Steering | hydrostatic power |
|---|---|
| Brakes | Wet disc brakes |
Case IH 585XL Hydraulic Capacity FAQ
Why is the Case IH 585XL hydraulic oil capacity not shown here?
The scraped specs do not list a hydraulic oil capacity for the Case IH 585XL, but pump flow is 12.4 gpm | 46.9 lpm, pressure is 2500 psi | 172.4 bar, and lift is listed as 4400 lbs | 1995 kg. For oil fill amount, use the manual or fill/check procedure, not pump flow or pressure.
Will the Case IH 585XL hydraulics feel fast or slow?
The useful speed clue is 12.4 gpm | 46.9 lpm pump flow, close to the 14 gpm benchmark for this group. It should be normal for general tractor hydraulic work, assuming the pump and valves are healthy.
What does the Case IH 585XL hydraulic pressure tell you?
The pressure spec is 2500 psi | 172.4 bar, close to the 2,600 psi benchmark. That is a normal working-pressure number for this tractor category.
What matters most for loader speed on the Case IH 585XL?
On the Case IH 585XL, 12.4 gpm | 46.9 lpm pump flow is around normal for loader/cylinder speed, 2,500 psi pressure affects force more than speed, and 4,400 lb listed lift is the number to watch for implement weight. Flow is the speed number; pressure and lift are the force numbers.
How do you judge hydraulic implement fit on the Case IH 585XL?
For implement matching, the useful checks are 12.4 gpm flow, 2,500 psi pressure, 4,400 lb listed lift, and II/I hitch. That combination is in the normal flow range for this size group, normal on pressure for the class, and best kept realistic on heavy rear implements, so match the implement by hydraulic demand, hitch category and actual tractor setup rather than model name alone.
Is the Case IH 585XL rear lift capacity strong?
The listed lift figure is 4400 lbs | 1995 kg, below the 7,000 lb benchmark. Keep rear implements realistic and pay attention to weight carried behind the lift points.
Will the Case IH 585XL hydraulics handle long hydraulic jobs?
The useful heat clues are 12.4 gpm flow, 2,500 psi pressure, and about 18.1 hydraulic hp by the pressure-flow estimate. Heat risk still depends on load, duty cycle, oil level, cooler condition and implement demand.
How much hydraulic power does the Case IH 585XL make on paper?
Using 2,500 psi and 12.4 gpm, the rough pressure-flow estimate is about 18.1 hydraulic hp. That is a useful middle-range hydraulic power figure for normal tractor work. It is a comparison number, not engine horsepower.
What do the Case IH 585XL hitch hydraulic specs mean?
The hitch-side hydraulic clues are that rear hitch type is II/I, hitch control is Top link draft sensing, and listed lift is 4400 lbs | 1995 kg. For real implement choice, hitch category gets it connected, lift capacity gets it raised, and hydraulic flow gets cylinders moving at a usable speed.
What should you check before servicing the Case IH 585XL hydraulics?
For service planning, pressure is listed at 2,500 psi and flow is listed at 12.4 gpm. Use the dipstick or sight glass and the operator manual as the final source before servicing.
Hydraulic capacity, pressure, flow, valves, remotes and lift specs can vary by year, market, transmission, pump option, loader package and tractor configuration. Check the operator manual, hydraulic oil dipstick/sight glass, parts book and official caseih.com website before buying hydraulic oil, servicing the system or sizing hydraulic implements.
