New Holland Workmaster 70 Dimensions, Length, Width & Height

Quick answer:

The New Holland Workmaster 70 dimensions found are: length is 129.5 inches | 328 cm, width is 77.5 inches | 196 cm, height is 97.6 inches | 247 cm, and wheelbase is 96.4 inches | 244 cm.

Length129.5 inches | 328 cm
Width77.5 inches | 196 cm
Height97.6 inches | 247 cm
Wheelbase96.4 inches | 244 cm

New Holland Workmaster 70 Dimensions

Overall length 2WD: 129.5 inches | 328 cm | 4WD: 134 inches | 340 cm
Overall width 77.5 inches | 196 cm
Overall height ROPS: 97.6 inches | 247 cm
Wheelbase 2WD: 96.4 inches | 244 cm | 4WD: 97.6 inches | 247 cm

New Holland Workmaster 70 Weight

2WD Weight 4442 lbs | 2014 kg
4WD Weight 5059 lbs | 2294 kg

New Holland Workmaster 70 Tire Size Notes

Industrial front 12.5×18
Industrial rear 18.4×24

New Holland Workmaster 70 Dimension Comparison Charts

Length comparison

This model

129.5 in

Average

145 in

Low

120 in

High

175 in

Width comparison

This model

77.5 in

Average

74 in

Low

60 in

High

90 in

Height comparison

This model

97.6 in

Average

100 in

Low

86 in

High

120 in

Wheelbase comparison

This model

96.4 in

Average

86 in

Low

70 in

High

105 in

Weight comparison

This model

4,442 lbs

Average

5,500 lbs

Low

3,500 lbs

High

8,000 lbs

Floor space footprint

This model

70 sq ft

Average

75 sq ft

Low

50 sq ft

High

110 sq ft

Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.

New Holland Workmaster 70 Extra Dimension Notes

Storage and fit note Using the first listed dimension values, the New Holland Workmaster 70 is about 129.5 inches | 328 cm long, about 77.5 inches | 196 cm wide, and about 97.6 inches | 247 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.

New Holland Workmaster 70 Dimensions FAQ

Is the New Holland Workmaster 70 a long tractor?

The New Holland Workmaster 70 has an average listed length at 129.5 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.

Is the New Holland Workmaster 70 narrow enough for tight storage?

The listed width is middle-of-the-pack at 77.5 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.

Is the New Holland Workmaster 70 tall for a shed or garage?

The listed height is about normal at 97.6 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.

How much floor space does the New Holland Workmaster 70 need?

The bare footprint is about 70 sq ft from a 10.8 ft length and 6.5 ft width. That is close to the 75 sq ft benchmark for this category.

Does the New Holland Workmaster 70 have a short or long wheelbase?

The wheelbase is long for the category at 96.4 in, which is above the 86 in benchmark average. That points to a longer chassis stance.

Is the New Holland Workmaster 70 heavy for its size?

The listed weight is light for the category at 4,442 lbs, which is below the 5,500 lbs benchmark average. That points to an easier-to-transport tractor than heavier models in the same class, before ballast or attachments are added.

Will the New Holland Workmaster 70 fit easily in storage?

The fit numbers are fairly normal for the category: length 129.5 in, width 77.5 in and height 97.6 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.

Official information note

Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official newholland.com website before making shed, trailer, garage or transport decisions.