Case IH 9250 Dimensions, Length, Width & Height

Quick answer:

The Case IH 9250 dimensions found are: length is 272.9 inches | 693 cm, width is 93.5 inches (minimum) | 237 cm, height is 143 inches | 363 cm, and wheelbase is 131 inches | 332 cm.

Length272.9 inches | 693 cm
Width93.5 inches (minimum) | 237 cm
Height143 inches | 363 cm
Wheelbase131 inches | 332 cm

Case IH 9250 Dimensions

Overall length 272.9 inches | 693 cm
Overall width 93.5 inches (minimum) | 237 cm
Overall height Exhaust: 143 inches | 363 cm
Wheelbase 131 inches | 332 cm
Front tread 60 to 130 inches | 152 to 330 cm
Rear tread 60 to 130 inches | 152 to 330 cm

Case IH 9250 Weight

Operating weight 30,060 lbs (20.8R42 duals) | 13635 kg

Case IH 9250 Tire Size Notes

Ag front 20.8-38
Ag rear 20.8-38

Case IH 9250 Dimension Comparison Charts

Length comparison

This model

272.9 in

Average

190 in

Low

155 in

High

240 in

Width comparison

This model

93.5 in

Average

96 in

Low

78 in

High

120 in

Height comparison

This model

143 in

Average

125 in

Low

105 in

High

150 in

Wheelbase comparison

This model

131 in

Average

115 in

Low

95 in

High

145 in

Weight comparison

This model

30,060 lbs

Average

13,000 lbs

Low

8,000 lbs

High

22,000 lbs

Floor space footprint

This model

177 sq ft

Average

130 sq ft

Low

90 sq ft

High

200 sq ft

Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.

Case IH 9250 Extra Dimension Notes

Storage and fit note Using the first listed dimension values, the Case IH 9250 is about 272.9 inches | 693 cm long, about 93.5 inches (minimum) | 237 cm wide, and about 143 inches | 363 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.

Case IH 9250 Dimensions FAQ

Is the Case IH 9250 a long tractor?

The Case IH 9250 is a longer tractor at 272.9 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.

Is the Case IH 9250 narrow enough for tight storage?

The listed width is middle-of-the-pack at 93.5 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.

Is the Case IH 9250 tall for a shed or garage?

The listed height is high for the category at 143 in, which is above the 125 in benchmark average. Do not rely on a rough garage-door guess; measure the actual tractor setup.

How much floor space does the Case IH 9250 need?

The bare footprint is about 177 sq ft from a 22.7 ft length and 7.8 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.

Does the Case IH 9250 have a short or long wheelbase?

The wheelbase is long for the category at 131 in, which is above the 115 in benchmark average. That points to a longer chassis stance.

Is the Case IH 9250 heavy for its size?

The listed weight is heavy for the category at 30,060 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.

Will the Case IH 9250 fit easily in storage?

Be careful. Based on length 272.9 in, width 93.5 in and height 143 in, at least one main dimension is above the category benchmark, so use the actual measured setup before planning clearance.

Official information note

Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.