The Case IH 8910 dimension specs found are: wheelbase is 118.3 inches | 300 cm.
Wheelbase118.3 inches | 300 cm
Case IH 8910 Dimensions
Wheelbase
118.3 inches | 300 cm
Ground clearance
2WD front axle: 22.4 inches | 56 cm | 4WD front axle: 16.6 inches | 42 cm
Front tread
60 to 88 inches | 152 to 223 cm
Case IH 8910 Weight
2WD Shipping weight
15215 lbs | 6901 kg
4WD Shipping weight
16230 lbs | 7361 kg
Operating weight
17,224 lbs | 7812 kg
Ballasted weight
18,956 lbs | 8598 kg
Case IH 8910 Tire Size Notes
Ag front
14L-16.1
Ag rear
20.8R-42
Case IH 8910 Dimension Comparison Charts
Wheelbase comparison
This model
118.3 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
22.4 in
Average
18 in
Low
12 in
High
26 in
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 8910 Dimensions FAQ
Does the Case IH 8910 have a short or long wheelbase?
The wheelbase is average for the category at 118.3 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 8910 have good ground clearance?
The listed ground clearance is high for the category at 22.4 in, which is above the 18 in benchmark average. It has more underside clearance than the benchmark average.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
