The Case IH 4894 dimensions found are: length is 237 inches | 601 cm, width is 99 inches (minimum) | 251 cm, height is 125 inches | 317 cm, and wheelbase is 110 inches | 279 cm.
Length237 inches | 601 cm
Width99 inches (minimum) | 251 cm
Height125 inches | 317 cm
Wheelbase110 inches | 279 cm
Case IH 4894 Dimensions
Overall length
237 inches | 601 cm
Overall width
99 inches (minimum) | 251 cm
Overall height
Exhaust: 125 inches | 317 cm
Wheelbase
110 inches | 279 cm
Ground clearance
Frame: 18 inches (frame) | 45 cm
Case IH 4894 Weight
Operating weight
25,750 lbs | 11680 kg
Ballasted weight
28,460 lbs | 12909 kg
Case IH 4894 Tire Size Notes
Ag front
18.4-34
Ag rear
18.4-34
Case IH 4894 Dimension Comparison Charts
Length comparison
This model
237 in
Average
190 in
Low
155 in
High
240 in
Width comparison
This model
99 in
Average
96 in
Low
78 in
High
120 in
Height comparison
This model
125 in
Average
125 in
Low
105 in
High
150 in
Wheelbase comparison
This model
110 in
Average
115 in
Low
95 in
High
145 in
Ground clearance comparison
This model
18 in
Average
18 in
Low
12 in
High
26 in
Weight comparison
This model
25,750 lbs
Average
13,000 lbs
Low
8,000 lbs
High
22,000 lbs
Floor space footprint
This model
163 sq ft
Average
130 sq ft
Low
90 sq ft
High
200 sq ft
Benchmarks use practical low, average and high dimension ranges for the large ag tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 4894 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 4894 is about 237 inches | 601 cm long, about 99 inches (minimum) | 251 cm wide, and about 125 inches | 317 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 4894 Dimensions FAQ
Is the Case IH 4894 a long tractor?
The Case IH 4894 is a longer tractor at 237 in, which is above the 190 in benchmark average. Plan more shed, trailer and turning-space allowance than an average tractor in this range.
Is the Case IH 4894 narrow enough for tight storage?
The listed width is middle-of-the-pack at 99 in, which is close to the 96 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 4894 tall for a shed or garage?
The listed height is about normal at 125 in, which is close to the 125 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 4894 need?
The bare footprint is about 163 sq ft from a 19.8 ft length and 8.2 ft width. That is above the 130 sq ft benchmark, so it needs more floor space than average.
Does the Case IH 4894 have a short or long wheelbase?
The wheelbase is average for the category at 110 in, which is close to the 115 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 4894 have good ground clearance?
The listed ground clearance is average at 18 in, which is close to the 18 in benchmark average. It is neither especially low nor especially high for this category.
Is the Case IH 4894 heavy for its size?
The listed weight is heavy for the category at 25,750 lbs, which is above the 13,000 lbs benchmark average. Plan trailer, shed floor and transport decisions around the real operating setup, not just the bare spec.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
