The Case IH 695 dimensions found are: length is 142 inches | 360 cm, minimum tread width is 75 inches | 190 cm, height is 96.5 inches | 245 cm, and wheelbase is 88.7 inches | 225 cm.
Length142 inches | 360 cm
Width75 inches | 190 cm
Height96.5 inches | 245 cm
Wheelbase88.7 inches | 225 cm
Case IH 695 Dimensions
Overall length
142 inches | 360 cm
Overall width
Minimum tread width: 75 inches | 190 cm | 75 inches | at minimum tread. 190 cm
Overall height
ROPS: 96.5 inches | 245 cm | Cab: 100.4 inches | 255 cm
Wheelbase
88.7 inches | 225 cm
Ground clearance
2WD front axle: 20.8 inches | 52 cm | 4WD front axle: 14.5 inches | 36 cm
Case IH 695 Weight
2WD ROPS Shipping weight
5720 lbs | 2594 kg
2WD Cab Shipping weight
6520 lbs | 2957 kg
$WD Cab Shipping weight
6785 lbs | 3077 kg
4WD Cab Shipping weight
7585 lbs | 3440 kg
Ballasted weight
8845 lbs | 4012 kg
Case IH 695 Tire Size Notes
Ag front
7.50-16
Ag rear
14.9-24
Case IH 695 Dimension Comparison Charts
Length comparison
This model
142 in
Average
145 in
Low
120 in
High
175 in
Width comparison
This model
75 in
Average
74 in
Low
60 in
High
90 in
Height comparison
This model
96.5 in
Average
100 in
Low
86 in
High
120 in
Wheelbase comparison
This model
88.7 in
Average
86 in
Low
70 in
High
105 in
Ground clearance comparison
This model
20.8 in
Average
15 in
Low
10 in
High
21 in
Floor space footprint
This model
74 sq ft
Average
75 sq ft
Low
50 sq ft
High
110 sq ft
Benchmarks use practical low, average and high dimension ranges for the utility tractor category. Use the actual tractor, tire setup and operator manual before planning shed, trailer or garage clearance.
Case IH 695 Extra Dimension Notes
Storage and fit note
Using the first listed dimension values, the Case IH 695 is about 142 inches | 360 cm long, about 75 inches | 190 cm wide, and about 96.5 inches | 245 cm tall. Allow extra room for mirrors, ROPS, tire stance, loader brackets, implements and safe walking space around the tractor.
Case IH 695 Dimensions FAQ
Is the Case IH 695 a long tractor?
The Case IH 695 has an average listed length at 142 in, which is close to the 145 in benchmark average. It is not unusually short or unusually long for this size class.
Is the Case IH 695 narrow enough for tight storage?
The listed width is middle-of-the-pack at 75 in, which is close to the 74 in benchmark average. It is not especially narrow, but it is not unusually wide either.
Is the Case IH 695 tall for a shed or garage?
The listed height is about normal at 96.5 in, which is close to the 100 in benchmark average. A normal-height result still needs extra clearance for ROPS, cab, exhaust and uneven ground.
How much floor space does the Case IH 695 need?
The bare footprint is about 74 sq ft from a 11.8 ft length and 6.2 ft width. That is close to the 75 sq ft benchmark for this category.
Does the Case IH 695 have a short or long wheelbase?
The wheelbase is average for the category at 88.7 in, which is close to the 86 in benchmark average. It sits near the normal benchmark for this tractor size.
Does the Case IH 695 have good ground clearance?
The listed ground clearance is high for the category at 20.8 in, which is above the 15 in benchmark average. It has more underside clearance than the benchmark average.
Will the Case IH 695 fit easily in storage?
The fit numbers are fairly normal for the category: length 142 in, width 75 in and height 96.5 in. It should be judged as an average-size tractor for its benchmark group, not a tiny one.
Official information note
Dimensions can vary by tire size, axle setup, cab, ROPS, ballast and market. Check the operator manual, parts book, old spec plate and official caseih.com website before making shed, trailer, garage or transport decisions.
