New Holland Workmaster 37 Battery Size + Replacement Guide

Quick answer:

The New Holland Workmaster 37 tractor battery spec found is 12 V, Group 34, with 800 CCA.

Voltage12 V
Group size34
Cold cranking amps800 CCA

New Holland Workmaster 37 Battery Size Details

Replacement battery recommendation 12 V, 800 CCA – Group 34
Battery voltage 12 V
Battery group size 34
Battery CCA 800 CCA

Battery CCA Comparison Chart

Battery CCA comparison

This model

800 CCA

Average

850 CCA

Low

650 CCA

High

1,100 CCA

Benchmarks use practical low, average and high cold-cranking-amp ranges for the utility tractor category. Use the exact battery label and manual before buying.

New Holland Workmaster 37 Extra Battery Notes

Replacement note For the New Holland Workmaster 37, match the replacement battery to the captured spec: 12 V, Group 34, 800 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location The battery on the New Holland Workmaster 37 tractor is located under the hood, accessible by unlatching and opening the hood forward to reach the battery compartment in front of the radiator
Battery replacement steps To replace the battery on a New Holland Workmaster 37 tractor, first, disconnect the negative terminal followed by the positive terminal. Then, remove the old battery, place the new battery in the tray, and connect the positive terminal first, then the negative terminal
Safe removal note Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note

Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official newholland.com website before ordering a replacement battery.