The New Holland Workmaster 35 tractor battery spec found is 12 V, Group 24F, with 660 CCA.
Voltage12 V
Group size24F
Cold cranking amps660 CCA
New Holland Workmaster 35 Battery Size Details
Replacement battery recommendation
12 V, 450 CCA – Group 24F, 660 CCA
Battery voltage
12 V
Battery group size
24F
Battery CCA
660 CCA
Battery CCA Comparison Chart
Battery CCA comparison
This model
660 CCA
Average
600 CCA
Low
400 CCA
High
800 CCA
Benchmarks use practical low, average and high cold-cranking-amp ranges for the compact tractor category. Use the exact battery label and manual before buying.
New Holland Workmaster 35 Extra Battery Notes
Replacement note
For the New Holland Workmaster 35, match the replacement battery to the captured spec: 12 V, Group 24F, 660 CCA. Physical fit, terminal layout and hold-down fit still matter
Battery location
The battery on the New Holland Workmaster 35 is located under the hood, which tilts up for easy access without removing side panels
Battery replacement steps
To replace the battery on a New Holland Workmaster 35 tractor, first disconnect the negative terminal, followed by the positive terminal. Then, remove the old battery, place the new battery in the tray, and connect the positive terminal first, followed by the negative terminal
Safe removal note
Disconnect the negative cable first, then disconnect the positive cable. Install the new battery, connect the positive cable first, then reconnect the negative cable last. That reduces the chance of shorting a tool against the frame
Official information note
Mistakes do happen. Battery specs can change by year, engine, market, terminal layout and installed options. Check the old battery label, operator manual, parts book and official newholland.com website before ordering a replacement battery.
