The Kubota TG1860G mower blade part number found is 77700-07210. The blade set part numbers found are K5647-3434 and K5647-34340. The blade measurement captured is center hole 0.38 in (10 mm). The deck uses 3 blades.
Kubota TG1860G Mower Blade Size and Part Numbers
| Mower blade part number | 77700-07210 |
|---|---|
| Mower blade set part number | K5647-3434 and K5647-34340 |
| Blade center hole size | 0.38 in (10 mm) |
| Number of blades | 3 blades |
| Blade type | mulching, standard, and Gator |
Kubota TG1860G Blade Notes
| Blade note | The Kubota TG1860G blade listing captured here shows single blade part number 77700-07210, blade set part numbers K5647-3434 and K5647-34340, and center hole 0.38 in (10 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the Kubota TG1860G, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the Kubota TG1860G is mulching, standard, and Gator. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Before ordering Kubota TG1860G blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
Kubota TG1860G Mower Blade FAQ
Why does the Kubota TG1860G blade center hole matter?
The captured center-hole detail is 0.38 in (10 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
Should you buy one Kubota TG1860G blade or a full set?
The single blade number captured is 77700-07210, and the set number captured is K5647-3434 and K5647-34340. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Which blade type should you use on the Kubota TG1860G?
The blade type captured is mulching, standard, and Gator. Use that against the captured fitment value 77700-07210. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
