The Kubota T1400 mower blade part number found is K5677-34340. The blade set part number found is K5647-34340. The blade measurement captured is center hole 1 in (25 mm). The deck uses 2 blades. The captured deck size is 42 in deck.
Kubota T1400 Mower Blade Size and Part Numbers
| Mower blade part number | K5677-34340 |
|---|---|
| Mower blade set part number | K5647-34340 |
| Blade center hole size | 1 in (25 mm) |
| Number of blades | 2 blades |
| Deck size | 42 in deck |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Mower deck size comparison
Kubota T1400 Blade Notes
| Blade note | The Kubota T1400 blade listing captured here shows single blade part number K5677-34340, blade set part number K5647-34340, and center hole 1 in (25 mm). Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the Kubota T1400, the captured deck information is deck size 42 in deck and blade count 2 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the Kubota T1400, blade type is listed as high-lift, mulching, standard, bagging, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | Before ordering Kubota T1400 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
Kubota T1400 Mower Blade FAQ
Why does the Kubota T1400 blade center hole matter?
The captured center-hole detail is 1 in (25 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
Should you buy one Kubota T1400 blade or a full set?
The single blade number captured is K5677-34340, and the set number captured is K5647-34340. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Why does the Kubota T1400 deck size matter before buying blades?
The captured deck setup is 42 in deck with 2 blades. That matters because blade sets are deck-specific, not just tractor-model-specific
Can you swap Kubota T1400 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use 42 in deck as the fitment starting point
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official kubotausa.com before ordering replacement blades.
