The John Deere Z335E mower blade part number found is GY20683. The blade set part numbers found are GY20683 and GX22151. The deck uses 2 blades.
John Deere Z335E Mower Blade Size and Part Numbers
| Mower blade part number | GY20683 |
|---|---|
| Mower blade set part number | GY20683 and GX22151 |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, and bagging |
John Deere Z335E Blade Notes
| Blade note | The John Deere Z335E blade listing captured here shows single blade part number GY20683 and blade set part numbers GY20683 and GX22151. Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere Z335E, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere Z335E is high-lift, mulching, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | The blunt rule with the John Deere Z335E: part number and center hole beat guesswork. A blade can be the right length and still be wrong |
John Deere Z335E Mower Blade FAQ
What is the difference between the John Deere Z335E blade number and blade set number?
The captured single blade number is GY20683, while the captured blade set number is GY20683 and GX22151. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap John Deere Z335E blade types?
The blade type captured is high-lift, mulching, and bagging. You can often choose a different style only if it fits the same deck and spindle setup. Use GY20683 as the fitment starting point
Is the captured John Deere Z335E blade part number enough to buy from?
The captured blade part number is GY20683. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
