The John Deere LR135 mower blade part number found is GX22151. The blade set part numbers found are GX22151 and GY20850. The blade measurement captured is length 21.34 in (542 mm). The deck uses 1 blade.
John Deere LR135 Mower Blade Size and Part Numbers
| Mower blade part number | GX22151 |
|---|---|
| Mower blade set part number | GX22151 and GY20850 |
| Blade length | 21.34 in (542 mm) |
| Number of blades | 1 blade |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade length comparison
John Deere LR135 Blade Notes
| Blade note | The John Deere LR135 blade listing captured here shows single blade part number GX22151, blade set part numbers GX22151 and GY20850, and length 21.34 in (542 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere LR135, the captured deck information is blade count 1 blade. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere LR135 is high-lift, mulching, standard, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Before ordering John Deere LR135 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere LR135 Mower Blade FAQ
Is a close blade length good enough for the John Deere LR135?
The blade length found is 21.34 in (542 mm). Close is not the same as correct. That is a common lawn tractor blade length range, but it still needs the right center hole, sail/lift shape and deck fitment. Match the OEM number or old blade before buying
What is the difference between the John Deere LR135 blade number and blade set number?
The captured single blade number is GX22151, while the captured blade set number is GX22151 and GY20850. Use the single blade number for one replacement and the set number when replacing the full deck set
Which blade type should you use on the John Deere LR135?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. Use that against the captured fitment value 21.34 in (542 mm). High-lift helps bagging/discharge; mulching blades need the right mulching setup
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
