The John Deere S220 mower blade part number found is UC22008. The blade set part number found is GY20850.
Blade part #UC22008
Blade set part #GY20850
John Deere S220 Mower Blade Size and Part Numbers
Mower blade part number
UC22008
Mower blade set part number
GY20850
Blade type
high-lift, mulching, standard, bagging, and 3-in-1
John Deere S220 Blade Notes
Blade note
The John Deere S220 blade listing captured here shows single blade part number UC22008 and blade set part number GY20850. Do not buy purely from model name if the mower deck or serial range is different
Blade type note
For the John Deere S220, blade type is listed as high-lift, mulching, standard, bagging, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching
Fitment note
Before ordering John Deere S220 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong
John Deere S220 Mower Blade FAQ
Should you buy one John Deere S220 blade or a full set?
The single blade number captured is UC22008, and the set number captured is GY20850. If one blade is bent from damage, one may be fine; if they are worn down, replacing the full set usually gives a cleaner cut
Can you swap John Deere S220 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use UC22008 as the fitment starting point
Is the captured John Deere S220 blade part number enough to buy from?
The captured blade part number is UC22008. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
