The John Deere LX289 mower blade part numbers found are M127500, M145476, and UC22009. The blade set part numbers found are GX22151 and GY20850. The blade measurement captured is thickness 0.25 in (6 mm). The deck uses 3 blades.
John Deere LX289 Mower Blade Size and Part Numbers
| Mower blade part number | M127500, M145476, and UC22009 |
|---|---|
| Mower blade set part number | GX22151 and GY20850 |
| Blade thickness | 0.25 in (6 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade thickness comparison
John Deere LX289 Blade Notes
| Blade note | The John Deere LX289 blade listing captured here shows single blade part numbers M127500, M145476, and UC22009, blade set part numbers GX22151 and GY20850, and thickness 0.25 in (6 mm). Do not buy purely from model name if the mower deck or serial range is different |
|---|---|
| Deck note | For the John Deere LX289, the captured deck information is blade count 3 blades. Deck size matters because the same model family can use different blade kits |
| Blade type note | For the John Deere LX289, blade type is listed as high-lift, mulching, standard, bagging, and 3-in-1. Pick the blade style for the job: clean discharge, bagging lift, or mulching |
| Fitment note | Before ordering John Deere LX289 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere LX289 Mower Blade FAQ
What is the difference between the John Deere LX289 blade number and blade set number?
The captured single blade number is M127500, M145476, and UC22009, while the captured blade set number is GX22151 and GY20850. Use the single blade number for one replacement and the set number when replacing the full deck set
Can you swap John Deere LX289 blade types?
The blade type captured is high-lift, mulching, standard, bagging, and 3-in-1. You can often choose a different style only if it fits the same deck and spindle setup. Use M127500, M145476, and UC22009 as the fitment starting point
Is the captured John Deere LX289 blade part numbers enough to buy from?
The captured blade part numbers is M127500, M145476, and UC22009. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
