Quick answer:
The blade measurement captured is center hole 1 in (25 mm). The deck uses 2 blades.
Blade sizecenter hole 1 in (25 mm)
Blade count2 blades
John Deere F910 Mower Blade Size and Part Numbers
| Blade center hole size | 1 in (25 mm) |
|---|---|
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, standard, and bagging |
John Deere F910 Blade Notes
| Blade note | The John Deere F910 blade listing captured here shows center hole 1 in (25 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere F910, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere F910 is high-lift, mulching, standard, and bagging. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the John Deere F910, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
John Deere F910 Mower Blade FAQ
Can you modify a John Deere F910 blade center hole to fit?
Do not do that. The captured center-hole detail is 1 in (25 mm). Grinding or drilling a mower blade can ruin balance and create vibration
Official information note
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
