The John Deere 245 mower blade part number found is GX21785. The blade measurement captured is thickness 0.164 in (4 mm). The deck uses 3 blades.
John Deere 245 Mower Blade Size and Part Numbers
| Mower blade part number | GX21785 |
|---|---|
| Blade thickness | 0.164 in (4 mm) |
| Number of blades | 3 blades |
| Blade type | high-lift, mulching, standard, and 3-in-1 |
Blade Size Comparison Chart
Blade thickness comparison
John Deere 245 Blade Notes
| Blade note | The John Deere 245 blade listing captured here shows single blade part number GX21785 and thickness 0.164 in (4 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere 245, the captured deck information is blade count 3 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere 245 is high-lift, mulching, standard, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | Before ordering John Deere 245 blades, compare the old blade stamp, center-hole shape, blade length and deck size. Close-looking blades can still be wrong |
John Deere 245 Mower Blade FAQ
Which blade type should you use on the John Deere 245?
The blade type captured is high-lift, mulching, standard, and 3-in-1. Use that against the captured fitment value GX21785. High-lift helps bagging/discharge; mulching blades need the right mulching setup
Is the captured John Deere 245 blade part number enough to buy from?
The captured blade part number is GX21785. That helps with OEM lookup, but the blade length, width and center hole were not fully captured here. Confirm the deck or old blade before trusting an aftermarket cross-reference
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
