The blade set part number found is M82408. The blade measurement captured is width 2.5 in (64 mm) and center hole 0.62 in (16 mm). The deck uses 2 blades.
John Deere 112L Mower Blade Size and Part Numbers
| Mower blade set part number | M82408 |
|---|---|
| Blade width | 2.5 in (64 mm) |
| Blade center hole size | 0.62 in (16 mm) |
| Number of blades | 2 blades |
| Blade type | high-lift, mulching, bagging, and 3-in-1 |
Blade Size Comparison Chart
Blade width comparison
John Deere 112L Blade Notes
| Blade note | The John Deere 112L blade listing captured here shows blade set part number M82408 and width 2.5 in (64 mm) and center hole 0.62 in (16 mm). Confirm the number against the deck tag, old blade stamp or official parts diagram before ordering |
|---|---|
| Deck note | For the John Deere 112L, the captured deck information is blade count 2 blades. This helps separate 42-inch, 48-inch, 54-inch and larger deck blade setups |
| Blade type note | The blade type captured for the John Deere 112L is high-lift, mulching, bagging, and 3-in-1. High-lift is usually better for bagging, while mulching blades are for chopping clippings finer under a compatible deck |
| Fitment note | For the John Deere 112L, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or old blade before ordering |
John Deere 112L Mower Blade FAQ
Should you buy John Deere 112L blades by length only?
No. The blade width found is 2.5 in (64 mm). That is a normal mower blade width range. Width affects airflow, lift and clipping movement under the deck. Use length, width, center hole and OEM part number together where possible
Why does the John Deere 112L blade center hole matter?
The captured center-hole detail is 0.62 in (16 mm). If the hole shape or size is wrong, the blade may not seat correctly on the spindle even if the length looks right
Mistakes do happen. Blade specs can change by year, mower deck, spindle, serial range and regional parts catalog. Please check the operator manual, old blade stamp, deck tag and official John Deere parts catalog before ordering replacement blades.
