The deck belt length found is 173 in (4,394 mm). The drive belt part number found is 70725-34710. The drive belt size found is 39.37 in (1,000 mm) long by 0.5 in (13 mm) wide.
Deck belt sizelength 173 in (4,394 mm)
Drive belt part #70725-34710
Drive belt sizelength 39.37 in (1,000 mm) and width 0.5 in (13 mm)
Deck size60 in deck
Kubota F2400 Belt Size and Part Numbers
Mower deck belt length
173 in (4,394 mm)
Drive belt part number
70725-34710
Drive belt length
39.37 in (1,000 mm)
Drive belt width
0.5 in (13 mm)
Deck size
60 in deck
Belt Size Comparison Chart
Belt length comparison
This model
173 in
Average
145 in
Low
100 in
High
220 in
Belt width comparison
This model
0.5 in
Average
0.5 in
Low
0.38 in
High
0.75 in
Mower deck size comparison
This model
60 in
Average
60 in
Low
48 in
High
72 in
Kubota F2400 Belt Notes
Mower deck belt note
The Kubota F2400 deck belt measurement captured here is length 173 in (4,394 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note
The Kubota F2400 drive or transmission belt listing shows part number 70725-34710, length 39.37 in (1,000 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Deck size note
The Kubota F2400 deck size captured here is 60 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck belt setups
Fitment note
Before ordering a Kubota F2400 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong
Kubota F2400 Belt Size FAQ
Is a close belt length good enough for the Kubota F2400 deck?
The deck belt length found is 173 in (4,394 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the Kubota F2400 belt by length only?
No. The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Which Kubota F2400 belt needs more careful length matching?
The deck belt is longer here: deck 173 in (4,394 mm) versus drive 39.37 in (1,000 mm), about 133.63 in (3,394 mm) different. Do not cross-match them just because both are mower belts
What is the fastest way to confirm the Kubota F2400 deck belt?
Start with the captured 60 in deck deck and the deck belt value 173 in (4,394 mm). Then check the belt routing decal or parts diagram so you do not order a belt for the wrong deck
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
