The Kubota F2000 deck belt part number found is 77700-05581. The deck belt size found is 161 in (4,089 mm) long by 0.62 in (16 mm) wide. The drive belt part number found is 77700-00465. The drive belt size found is 122 in (3,099 mm) long by 0.62 in (16 mm) wide.
Deck belt part #77700-05581
Deck belt sizelength 161 in (4,089 mm) and width 0.62 in (16 mm)
Drive belt part #77700-00465
Drive belt sizelength 122 in (3,099 mm) and width 0.62 in (16 mm)
Deck size60 in deck
Kubota F2000 Belt Size and Part Numbers
Mower deck belt part number
77700-05581
Mower deck belt length
161 in (4,089 mm)
Mower deck belt width
0.62 in (16 mm)
Drive belt part number
77700-00465
Drive belt length
122 in (3,099 mm)
Drive belt width
0.62 in (16 mm)
Deck size
60 in deck
Belt Size Comparison Chart
Belt length comparison
This model
161 in
Average
145 in
Low
100 in
High
220 in
Belt width comparison
This model
0.62 in
Average
0.75 in
Low
0.5 in
High
1.25 in
Mower deck size comparison
This model
60 in
Average
60 in
Low
48 in
High
72 in
Kubota F2000 Belt Notes
Mower deck belt note
The Kubota F2000 deck belt listing shows part number 77700-05581, length 161 in (4,089 mm) and width 0.62 in (16 mm). Match the old belt, deck size and routing before spending money
Drive belt note
The Kubota F2000 drive or transmission belt listing shows part number 77700-00465, length 122 in (3,099 mm) and width 0.62 in (16 mm). Do not mix it up with the deck belt because the routing and job are different
Deck size note
For the Kubota F2000, deck size is listed as 60 in deck. Always match belt specs to the deck fitted to your machine, not just the tractor model name
Fitment note
Before ordering a Kubota F2000 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong
Kubota F2000 Belt Size FAQ
Why can the correct Kubota F2000 deck belt still slip?
The deck belt length found is 161 in (4,089 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together
Why does 0.62 in (16 mm) belt width matter on the Kubota F2000?
The captured deck belt width is 0.62 in (16 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear
How do you avoid mixing up the Kubota F2000 deck and drive belts?
Use the belt position first: deck belt part number 77700-05581 and drive belt part number 77700-00465. A deck belt number does not automatically fit the drive system, even when an aftermarket listing makes the cross-reference look close
What is the fastest way to confirm the Kubota F2000 deck belt?
Start with the captured 60 in deck deck and the deck belt value 161 in (4,089 mm). Then check the belt routing decal or parts diagram so you do not order a belt for the wrong deck
Official information note
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official kubotausa.com before ordering a replacement belt.
