Cub Cadet 105 Belt Size

Quick answer:

The Cub Cadet 105 deck belt part number found is 954-04240. The deck belt size found is 80 in (2,032 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is 754-04060. The drive belt size found is 83 in (2,108 mm) long by 0.5 in (13 mm) wide.

Deck belt part #954-04240
Deck belt sizelength 80 in (2,032 mm) and width 0.5 in (13 mm)
Drive belt part #754-04060
Drive belt sizelength 83 in (2,108 mm) and width 0.5 in (13 mm)

Cub Cadet 105 Belt Size and Part Numbers

Mower deck belt part number 954-04240
Mower deck belt length 80 in (2,032 mm)
Mower deck belt width 0.5 in (13 mm)
Drive belt part number 754-04060
Drive belt length 83 in (2,108 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

80 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

Cub Cadet 105 Belt Notes

Mower deck belt note The Cub Cadet 105 deck belt listing shows part number 954-04240, length 80 in (2,032 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering
Drive belt note The Cub Cadet 105 drive or transmission belt listing shows part number 754-04060, length 83 in (2,108 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown
Fitment note The blunt rule with the Cub Cadet 105: part number beats guesswork. If the belt is off by even a small amount, it can slip, squeal, jump pulleys or wear fast

Cub Cadet 105 Belt Size FAQ

Is a close belt length good enough for the Cub Cadet 105 deck?

The deck belt length found is 80 in (2,032 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly

Should you buy the Cub Cadet 105 belt by length only?

No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official cubcadet.com before ordering a replacement belt.