John Deere RX95 Belt Size

Quick answer:

The deck belt size found is 62.48 in (1,587 mm) long by 0.31 in (8 mm) wide. The drive belt size found is 43 in (1,092 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 62.48 in (1,587 mm) and width 0.31 in (8 mm)
Drive belt sizelength 43 in (1,092 mm) and width 0.5 in (13 mm)

John Deere RX95 Belt Size and Part Numbers

Mower deck belt length 62.48 in (1,587 mm)
Mower deck belt width 0.31 in (8 mm)
Drive belt length 43 in (1,092 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

62 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.31 in

Average

0.38 in

Low

0.25 in

High

0.5 in

John Deere RX95 Belt Notes

Mower deck belt note The John Deere RX95 deck belt measurement captured here is length 62.48 in (1,587 mm) and width 0.31 in (8 mm). Match the old belt, deck size and routing before spending money
Drive belt note The John Deere RX95 drive or transmission belt measurement captured here is length 43 in (1,092 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Fitment note Belts are cheap until you buy the wrong one twice. On the John Deere RX95, confirm belt route, old belt label and OEM part number before ordering

John Deere RX95 Belt Size FAQ

Why can the correct John Deere RX95 deck belt still slip?

The deck belt length found is 62.48 in (1,587 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together

Why does 0.31 in (8 mm) belt width matter on the John Deere RX95?

The captured deck belt width is 0.31 in (8 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear

Which John Deere RX95 belt needs more careful length matching?

The deck belt is longer here: deck 62.48 in (1,587 mm) versus drive 43 in (1,092 mm), about 19.48 in (495 mm) different. Do not cross-match them just because both are mower belts

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.