The John Deere RX75 deck belt part number found is M112006. The deck belt length found is 65 in (1,651 mm). The drive belt size found is 47 in (1,194 mm) long by 0.5 in (13 mm) wide.
John Deere RX75 Belt Size and Part Numbers
| Mower deck belt part number | M112006 |
|---|---|
| Mower deck belt length | 65 in (1,651 mm) |
| Drive belt length | 47 in (1,194 mm) |
| Drive belt width | 0.5 in (13 mm) |
| Deck size | 60 in deck |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Mower deck size comparison
John Deere RX75 Belt Notes
| Mower deck belt note | The John Deere RX75 deck belt listing shows part number M112006 with length 65 in (1,651 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The John Deere RX75 drive or transmission belt measurement captured here is length 47 in (1,194 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Deck size note | The John Deere RX75 deck size captured here is 60 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck belt setups |
| Fitment note | Before ordering a John Deere RX75 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong |
John Deere RX75 Belt Size FAQ
Is a close belt length good enough for the John Deere RX75 deck?
The deck belt length found is 65 in (1,651 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the John Deere RX75 belt by length only?
No. The drive belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Which John Deere RX75 belt needs more careful length matching?
The deck belt is longer here: deck 65 in (1,651 mm) versus drive 47 in (1,194 mm), about 18 in (457 mm) different. Do not cross-match them just because both are mower belts
Should you order the John Deere RX75 belt by tractor model or deck size?
Use both. The deck size captured is 60 in deck, and the captured deck belt value is 65 in (1,651 mm). Model name alone is risky when multiple deck sizes or serial ranges exist
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
