The John Deere LT160 deck belt part number found is M126536. The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is M144044. The drive belt size found is 92 in (2,337 mm) long by 0.5 in (13 mm) wide.
John Deere LT160 Belt Size and Part Numbers
| Mower deck belt part number | M126536 |
|---|---|
| Mower deck belt length | 95 in (2,413 mm) |
| Mower deck belt width | 0.5 in (13 mm) |
| Drive belt part number | M144044 |
| Drive belt length | 92 in (2,337 mm) |
| Drive belt width | 0.5 in (13 mm) |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
John Deere LT160 Belt Notes
| Mower deck belt note | The John Deere LT160 deck belt listing shows part number M126536, length 95 in (2,413 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The John Deere LT160 drive or transmission belt listing shows part number M144044, length 92 in (2,337 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Fitment note | For the John Deere LT160, use the listed specs as a buying guide, but confirm against the operator manual, parts diagram or belt label before spending money |
John Deere LT160 Belt Size FAQ
Is a close belt length good enough for the John Deere LT160 deck?
The deck belt length found is 95 in (2,413 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the John Deere LT160 belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Why are there separate belt part numbers for the John Deere LT160?
The captured values separate the belt jobs: deck belt part number M126536 and drive belt part number M144044. Treat each number as position-specific and confirm it against the parts diagram before ordering
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
