The deck belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide. The drive belt part number found is M800100. The drive belt size found is 83 in (2,108 mm) long by 0.5 in (13 mm) wide.
John Deere 332 Belt Size and Part Numbers
| Mower deck belt length | 95 in (2,413 mm) |
|---|---|
| Mower deck belt width | 0.5 in (13 mm) |
| Drive belt part number | M800100 |
| Drive belt length | 83 in (2,108 mm) |
| Drive belt width | 0.5 in (13 mm) |
| Deck size | 54 in deck |
Belt Size Comparison Chart
Belt length comparison
Belt width comparison
Mower deck size comparison
John Deere 332 Belt Notes
| Mower deck belt note | The John Deere 332 deck belt measurement captured here is length 95 in (2,413 mm) and width 0.5 in (13 mm). Confirm the belt against the deck tag, belt decal or parts diagram before ordering |
|---|---|
| Drive belt note | The John Deere 332 drive or transmission belt listing shows part number M800100, length 83 in (2,108 mm) and width 0.5 in (13 mm). Treat it as partial drive-belt data if no matching width or OEM part number is shown |
| Deck size note | The John Deere 332 deck size captured here is 54 in deck. This helps separate 42-inch, 48-inch, 54-inch and larger deck belt setups |
| Fitment note | Belts are cheap until you buy the wrong one twice. On the John Deere 332, confirm deck size, belt route and OEM part number before ordering |
John Deere 332 Belt Size FAQ
Is a close belt length good enough for the John Deere 332 deck?
The deck belt length found is 95 in (2,413 mm). Close is not the same as correct. A belt that is slightly short can overload bearings, while one slightly long can slip or fail to engage the blades cleanly
Should you buy the John Deere 332 belt by length only?
No. The deck belt width found is 0.5 in (13 mm). That is the common 1/2-inch belt width range. Still match the OEM number because the belt angle, fabric wrap and effective length can differ. Use length, width and OEM part number together where possible
Which John Deere 332 belt needs more careful length matching?
The deck belt is longer here: deck 95 in (2,413 mm) versus drive 83 in (2,108 mm), about 12 in (305 mm) different. Do not cross-match them just because both are mower belts
Should you order the John Deere 332 belt by tractor model or deck size?
Use both. The deck size captured is 54 in deck, and the captured deck belt value is 95 in (2,413 mm). Model name alone is risky when multiple deck sizes or serial ranges exist
Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.
