John Deere GX70 Belt Size

Quick answer:

The deck belt length found is 65 in (1,651 mm). The drive belt part number found is M800100. The drive belt size found is 95 in (2,413 mm) long by 0.5 in (13 mm) wide.

Deck belt sizelength 65 in (1,651 mm)
Drive belt part #M800100
Drive belt sizelength 95 in (2,413 mm) and width 0.5 in (13 mm)

John Deere GX70 Belt Size and Part Numbers

Mower deck belt length 65 in (1,651 mm)
Drive belt part number M800100
Drive belt length 95 in (2,413 mm)
Drive belt width 0.5 in (13 mm)

Belt Size Comparison Chart

Belt length comparison

This model

65 in

Average

75 in

Low

50 in

High

105 in

Belt width comparison

This model

0.5 in

Average

0.5 in

Low

0.38 in

High

0.75 in

John Deere GX70 Belt Notes

Mower deck belt note The John Deere GX70 deck belt measurement captured here is length 65 in (1,651 mm). Match the old belt, deck size and routing before spending money
Drive belt note The John Deere GX70 drive or transmission belt listing shows part number M800100, length 95 in (2,413 mm) and width 0.5 in (13 mm). Do not mix it up with the deck belt because the routing and job are different
Fitment note Before ordering a John Deere GX70 belt, compare the old belt routing, pulley layout and deck size if available. A close-looking belt can still be wrong

John Deere GX70 Belt Size FAQ

Why can the correct John Deere GX70 deck belt still slip?

The deck belt length found is 65 in (1,651 mm). Even with the right length, a weak idler spring, worn pulley groove or wrong belt path can make it slip. The part number and routing matter together

Why does 0.5 in (13 mm) belt width matter on the John Deere GX70?

The captured drive belt width is 0.5 in (13 mm). Pulley grooves are cut for a matching belt profile. Wrong width can cause squeal, heat, poor blade speed or fast belt wear

Which John Deere GX70 belt needs more careful length matching?

The drive belt is longer here: deck 65 in (1,651 mm) versus drive 95 in (2,413 mm), about 30 in (762 mm) different. Do not cross-match them just because both are mower belts

Official information note

Mistakes do happen. Belt specs can change by year, mower deck, pulley layout, serial range and regional parts catalog. Please check the operator manual, belt routing decal, old belt label and official John Deere parts catalog before ordering a replacement belt.