The Kubota M1-55 coolant capacity is listed as 2.3 gal (8.7 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.
Kubota M1-55 Coolant Capacity
| Coolant capacity | 2.3 gal (8.7 L) |
|---|---|
| Coolant type | ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and water mix |
| Engine horsepower | 55 hp (41 kW) |
| Engine displacement | 3.2 L (198.1 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota M1-55 Coolant and Engine Notes
| Coolant capacity note | For service planning, the Kubota M1-55 should be treated as 2.3 gal (8.7 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill |
|---|---|
| Coolant type note | For the Kubota M1-55, coolant type matters as much as capacity. The clean captured value is ethylene glycol-based coolant and ASTM D3306 compatible |
| Antifreeze mix note | The Kubota M1-55 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control |
| Engine context note | For the Kubota M1-55, the supporting engine specs are engine horsepower 55 hp (41 kW) and displacement 3.2 L (198.1 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual |
| Refill note | The practical service move for the Kubota M1-55: buy enough coolant for 2.3 gal (8.7 L), fill to spec, run the engine, then recheck the radiator and overflow bottle after cooling |
Kubota M1-55 Coolant Capacity FAQ
What is the Kubota M1-55 coolant capacity?
The Kubota M1-55 coolant capacity is listed as 2.3 gal (8.7 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota M1-55?
No. Use ethylene glycol-based coolant and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota M1-55?
Premixed coolant can be fine if it matches ethylene glycol-based coolant and ASTM D3306 compatible and the required mix. The captured mix for the Kubota M1-55 is 50/50 coolant and water mix.
How often should I change coolant in the Kubota M1-55?
The captured coolant change interval for the Kubota M1-55 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
What engine specs affect Kubota M1-55 coolant capacity?
The captured engine context is horsepower 55 hp (41 kW) and displacement 3.2 L (198.1 cu in). Engine size is one reason coolant capacity changes between tractors.
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
