Kubota L345 Coolant Capacity

Quick answer:

The Kubota L345 coolant capacity is listed as 2.2 gal (8.3 L). It also lists coolant type ethylene glycol-based coolant and ASTM D3306 compatible and antifreeze mix 50/50 coolant and water mix.

Coolant capacity2.2 gal (8.3 L)
Coolant typeethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix50/50 coolant and water mix

Kubota L345 Coolant Capacity

Coolant capacity 2.2 gal (8.3 L)
Coolant type ethylene glycol-based coolant and ASTM D3306 compatible
Antifreeze mix 50/50 coolant and water mix
Engine horsepower 34 hp (25.4 kW)
Engine displacement 1.5 L (91.5 cu in)

Coolant Capacity Comparison Chart

Coolant capacity comparison

This model

2.2 gal

Average

2 gal

Low

1 gal

High

4 gal

Engine horsepower comparison

This model

34 hp

Average

35 hp

Low

20 hp

High

60 hp

Engine displacement comparison

This model

1.5 L

Average

1.7 L

Low

0.9 L

High

3 L

Kubota L345 Coolant and Engine Notes

Coolant capacity note For service planning, the Kubota L345 should be treated as 2.2 gal (8.3 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill
Coolant type note The captured coolant type for the Kubota L345 is ethylene glycol-based coolant and ASTM D3306 compatible. Do not mix unknown coolant types unless the label and manual say they are compatible
Antifreeze mix note The Kubota L345 antifreeze mix is listed as 50/50 coolant and water mix. That is the normal protection range for freezing, boiling and corrosion control
Engine context note For the Kubota L345, the supporting engine specs are engine horsepower 34 hp (25.4 kW) and displacement 1.5 L (91.5 cu in). Use them as context beside the coolant capacity, not as a replacement for the manual
Refill note For a coolant change on the Kubota L345, do not just dump in coolant and walk away. Fill slowly, run it up to temperature, cool it down and top up as needed

Kubota L345 Coolant Capacity FAQ

How much coolant does the Kubota L345 take?

The main coolant amount captured for the Kubota L345 is 2.2 gal (8.3 L). Buy a little extra so you can top up after the engine warms up and cools down.

Does coolant type matter on the Kubota L345?

Yes. Capacity tells you how much to buy; coolant type tells you what to buy. For the Kubota L345, the captured coolant type is ethylene glycol-based coolant and ASTM D3306 compatible.

What antifreeze mix does the Kubota L345 use?

The captured antifreeze mix for the Kubota L345 is 50/50 coolant and water mix. A 50/50-style mix is the common practical answer unless your manual or climate calls for something different.

When should the Kubota L345 coolant be replaced?

Use the service interval in the operator manual as the service guide. Coolant can look okay but still lose corrosion protection over time.

What engine specs affect Kubota L345 coolant capacity?

The captured engine context is horsepower 34 hp (25.4 kW) and displacement 1.5 L (91.5 cu in). Engine size is one reason coolant capacity changes between tractors.

Official information note

Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.