The Kubota L200 coolant capacity is listed as 1.59 gal (6 L). It also lists coolant type ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and antifreeze mix 50/50 coolant and distilled water mix.
Kubota L200 Coolant Capacity
| Coolant capacity | 1.59 gal (6 L) |
|---|---|
| Cooling system capacity | 1.59 gal (6 L) |
| Radiator capacity | 1.59 gal (6 L) |
| Coolant type | ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible |
| Antifreeze mix | 50/50 coolant and distilled water mix |
| Engine horsepower | 21.1 hp (15.7 kW) |
| Engine displacement | 0.8 L (45.8 cu in) |
Coolant Capacity Comparison Chart
Coolant capacity comparison
Engine horsepower comparison
Engine displacement comparison
Kubota L200 Coolant and Engine Notes
| Coolant capacity note | For service planning, the Kubota L200 should be treated as 1.59 gal (6 L) coolant capacity. That is a compact tractor cooling system where a normal premixed coolant jug may cover most of the refill |
|---|---|
| Radiator capacity note | Radiator capacity is listed as 1.59 gal (6 L). The full cooling system can be higher because coolant also sits in the engine and hoses |
| Coolant type note | Use the right coolant formula for the Kubota L200: ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible. Cheap wrong coolant is not a smart saving if it causes corrosion or deposits |
| Antifreeze mix note | The 50/50 coolant and distilled water mix mix gives the Kubota L200 coolant system a sensible balance of freeze protection, boil protection and corrosion protection |
| Engine context note | The Kubota L200 engine data captured here is engine horsepower 21.1 hp (15.7 kW) and displacement 0.8 L (45.8 cu in). Bigger engines usually need more coolant and more careful refill bleeding |
| Refill note | Coolant changes are simple but easy to do sloppily. On the Kubota L200, plan around 1.59 gal (6 L) and confirm the final level after air works out of the system |
Kubota L200 Coolant Capacity FAQ
What is the Kubota L200 coolant capacity?
The Kubota L200 coolant capacity is listed as 1.59 gal (6 L) for coolant capacity. Use this as the refill planning number and confirm the final level at the radiator or overflow bottle.
Can I use any coolant in the Kubota L200?
No. Use ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible or a coolant that clearly matches the manual’s required spec. Wrong coolant can create corrosion, deposits or seal problems.
Is premixed coolant okay for the Kubota L200?
Premixed coolant can be fine if it matches ethylene glycol-based coolant, Kubota Genuine Coolant, and ASTM D3306 compatible and the required mix. The captured mix for the Kubota L200 is 50/50 coolant and distilled water mix.
How often should I change coolant in the Kubota L200?
The captured coolant change interval for the Kubota L200 is the service interval in the operator manual. If service history is unknown, changing it is usually smarter than guessing.
Why does the Kubota L200 coolant amount differ from other models?
Coolant capacity changes with engine and radiator setup. For the Kubota L200, the supporting engine data is horsepower 21.1 hp (15.7 kW) and displacement 0.8 L (45.8 cu in).
Mistakes do happen. Tractor coolant specs can change by year, market, engine, radiator, cab/heater setup and service procedure. Please check the operator manual, decal information and official kubotausa.com website for official information before draining or refilling the cooling system.
